summaryrefslogtreecommitdiff
path: root/doc/release.cli
diff options
context:
space:
mode:
authorBoris Kolpackov <boris@codesynthesis.com>2019-11-20 16:56:28 +0200
committerBoris Kolpackov <boris@codesynthesis.com>2019-11-20 16:56:28 +0200
commitf07e14f7cc43baf76fd6916a85be5bf2b42c531a (patch)
tree725e31d32216b41469461a6c72bdaf573af25772 /doc/release.cli
parent35219dcea1530755fc37713a70d49322ec169f48 (diff)
Updates for 0.12.0 releasev0.12.0
Diffstat (limited to 'doc/release.cli')
-rw-r--r--doc/release.cli81
1 files changed, 59 insertions, 22 deletions
diff --git a/doc/release.cli b/doc/release.cli
index 66eaebd..3f716da 100644
--- a/doc/release.cli
+++ b/doc/release.cli
@@ -31,7 +31,7 @@ and then be queued and published (effectively released) as part of the
bundle the release of dependencies with the release of \c{build2} to keep
the process as streamlined as possible.
-\N|When unbu ndling the release of a dependency we need to remove its
+\N|When unbundling the release of a dependency we need to remove its
distribution from \c{etc/stage} and add the pre-distributed packages
(for example, from \c{public}) to \c{staging/repository/1/}.|
@@ -150,7 +150,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages
\h#doc|Review documentation|
Review the following documentation for (1) sample output changes and (2)
- still being relevant/making sense.
+ still being relevant/making sense. Also (3) check the \c{NEWS} files for
+ anything new worth mentioning.
\N|Ideally this should be done during development but it's easy to forget.
Also, check if there is any new documentation that has been added that is
@@ -160,7 +161,7 @@ distribution from \c{etc/stage} and add the pre-distributed packages
\li|Install guide: 1 & 2.|
- \li|Toolchain introduction: 1 & 2 (use \c{intro} script output).|
+ \li|Toolchain introduction: 1, 2 & 3 (use \c{intro} script output for 2).|
\li|Introduction in the build system manual: 1 (uses \c{bdep-new(1)}
output).|
@@ -232,13 +233,35 @@ distribution from \c{etc/stage} and add the pre-distributed packages
Review \c{staging/0/} and \c{staging/repository/1/} for anything stray.
- Restage with \c{baseutils}/\c{mingw} regeneration:
+ If no upgrade is possible from the previous version, uncomment errors in
+ install scripts (and add a note to restore after the release).
- \
- etc/stage -b
- \
+ Restage and upgrade \c{brep} by performing the following steps:
+
+ \ol|
+
+ \li|Disable building of all repositories on \c{stage} by adding the
+ \c{buildable:no} field at the end of each line in \c{loadtab}.|
+
+ \li|Restage with \c{baseutils}/\c{mingw} regeneration:
+
+ \
+ etc/stage -b
+ \
+
+ |
- Upgrade \c{brep} on \c{stage} and sync latest \c{buildtab}s.
+ \li|While build machines are bootstrapping, upgrade \c{brep} on \c{stage},
+ sync latest \c{buildtab}s but do not restart the web server.|
+
+ \li|Once all build machines have bootstrapped, enabling build of all
+ repositories and restart the web server. To check bootstrap progress:
+
+ \
+ ./ls-machines -b stage -c stage -c devel
+ \
+
+ ||
Verify \c{stage} build is clean, nothing is unbuilt.
@@ -304,11 +327,15 @@ distribution from \c{etc/stage} and add the pre-distributed packages
\li|Close schema versions in \c{bpkg}, \c{bdep}, and \c{brep}.|
- \li|Change \c{BUILD2_STAGE} in \c{build2/build2/config.hxx.in} to \c{false}.|
+ \li|Change \c{LIBBUILD2_STAGE} in \c{build2/libbuild2/config.hxx.in} to \c{false}.|
\li|If necessary, update minimum \c{build2} and \c{bpkg} version
requirements in projects generated by \c{bdep-new}. \b{This must be
- done if created projects use new features.}|
+ done if created projects use new features.}
+
+ \N|Why shouldn't we always do this for simplicity? Maybe because then
+ we cannot run tests using \c{public} services? Also the below upgrade
+ steps will break since there is no continuity.||
\li|Change version by updating (including with new modules and/or new
dependencies) and then executing:
@@ -319,6 +346,9 @@ distribution from \c{etc/stage} and add the pre-distributed packages
git -C build2-toolchain commit --amend # \"Change version to X.Y.Z\"
\
+ Note that \c{libbuild2-hello} is independently versioned but may still
+ need to update minimum \c{build2} version requirements (see below).
+
|
\li|Tag by executing \c{tag.sh\ <version>}.|
@@ -360,13 +390,18 @@ distribution from \c{etc/stage} and add the pre-distributed packages
BDEP_SYNC=0 b ~/work/build2/builds/gcc7-asan/
\
- ||
+ |
+
+
+ \li|Update \c{libbuild2-hello} if required.||
Verify key tests pass (in particular, the \c{bdep} tests will now be running
against \c{public} services):
\
b test: build2/ bpkg/ bdep/
+ b test: bpkg/ config.bpkg.test.remote=true
+ b test: libbuild2-hello/libbuild2-hello-tests/
\
\N|We could have queued after this step before preparing
@@ -397,8 +432,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages
\li|Regenerate documentation in each package inside as well as in
\c{build2-toolchain} itself.|
- \li|Update ODB by copying relevant files from the previous step (trust
- me, this is the easy way). Make sure all \c{*-odb.*} are copied!|
+ \li|Update ODB by copying relevant files from the previous step (trust me,
+ this is the easy way for now). Make sure all \c{*-odb.*} are copied!|
\li|Change \c{BUILD2_REPO} in \c{build2-toolchain} build scripts to
\c{queue}.||
@@ -436,7 +471,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages
If queued package manifests contain new values, then the bpkg-rep-publish
script will fail to create repository due to unknown manifest values. To
- resolve this we temporarily add (to \c{crontab}) \c{--ignore-unknown}.
+ resolve this we temporarily add (to \c{crontab}) \c{--ignore-unknown} and
+ make a note to restore.
\h#build-public|Verify queued packages build with \c{public}|
@@ -483,17 +519,15 @@ distribution from \c{etc/stage} and add the pre-distributed packages
\c{queue} builds. As a result, after this update, \c{public} build hosts
may not have some of the new (or renamed) build machines.|
- Adjust \c{stage} and \c{devel} build host configurations to enable the
- \c{queue} toolchain. Shift most instances from \c{stage} to \c{queue}
- in the hardware class-specific configurations. Regenerate affected
- configurations and reboot build hosts:
+ Adjust \c{stage} and \c{devel} build host configurations (both \c{*-config}
+ and hardware classes) to enable the \c{queue} toolchain. Shift most
+ instances from \c{stage} to \c{queue} in the hardware class-specific
+ configurations. Regenerate affected configurations and reboot build hosts:
\
cd private/buildos/
- ./gen-config stage <class>
- ./gen-config devel <class>
-
+ ./regen
./po-hosts -r -c stage -c devel
\
@@ -550,6 +584,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages
~/work/build2/buildos/remove-machine <host> <machine>
\
+ Then move now legacy machines to the \"legacy\" build host.
+
Also review deployed machines against the latest available versions and
upgrade those that are not the latest:
@@ -591,7 +627,8 @@ distribution from \c{etc/stage} and add the pre-distributed packages
Note that once published, the existing install instructions/download
links are no longer usable, so do not linger (in fact, may make sense
- to update Download and Install pages before publishing packages).
+ to update Download and Install pages before publishing packages and
+ sync only them immediately after).
\h#start-public|Start \c{public} builds|