aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/manual.cli75
-rw-r--r--libbuild2/cc/functions.cxx4
-rw-r--r--libbuild2/filesystem.hxx2
-rw-r--r--libbuild2/install/functions.cxx67
-rw-r--r--libbuild2/install/init.cxx76
-rw-r--r--libbuild2/install/operation.cxx324
-rw-r--r--libbuild2/install/operation.hxx37
-rw-r--r--libbuild2/install/rule.cxx66
-rw-r--r--libbuild2/install/rule.hxx13
-rw-r--r--libbuild2/utility.hxx1
10 files changed, 599 insertions, 66 deletions
diff --git a/doc/manual.cli b/doc/manual.cli
index eca5bbe..e9b59d2 100644
--- a/doc/manual.cli
+++ b/doc/manual.cli
@@ -6282,6 +6282,81 @@ for example:
assert (!$install.relocatable) 'relocatable installation not supported'
\
+
+\h#install-filter|Installation Filtering|
+
+While project authors determine what gets installed at the \c{buildfile}
+level, the users of the project can further filter the installation using the
+\c{config.install.filter} variable. \N{This variable can only be specified as
+a global override.}
+
+The value of this variable is a list of key-value pairs that specify the
+filesystem entries to include or exclude from the installation. For example,
+the following filters will omit installing headers and static libraries
+(notice the quoting of the wildcard).
+
+\
+$ b install !config.install.filter='include/@false \"*.a\"@false'
+\
+
+The key in each pair is a file or directory path or a path wildcard pattern.
+If a key is relative and contains a directory component or is a directory,
+then it is treated relative to the corresponding \c{config.install.*}
+location. Otherwise (simple path, normally a pattern), it is matched against
+the leaf of any path. Note that if an absolute path is specified, it should be
+without the \c{config.install.chroot} prefix.
+
+The value in each pair is either \c{true} (include) or \c{false} (exclude).
+The filters are evaluated in the order specified and the first match that is
+found determines the outcome. If no match is found, the default is to
+include. For a directory, while \c{false} means exclude all the sub-paths
+inside this directory, \c{true} does not mean that all the sub-paths will be
+included wholesale. Rather, the matched component of the sub-path is treated
+as included with the rest of the components matched against the following
+sub-filters. For example:
+
+\
+$ b install !config.install.filter='
+ include/x86_64-linux-gnu/@true
+ include/x86_64-linux-gnu/details/@false
+ include/@false'
+\
+
+The \c{true} or \c{false} value may be followed by comma and the \c{symlink}
+modifier to only apply to symlink filesystem entries. For example:
+
+\
+$ b !config.install.filter='\"*.so\"@false,symlink'
+\
+
+Note that this mechanism only affects what gets physically copied to the
+installation directory without affecting what gets built for install or the
+view of what gets installed at the \c{buildfile} level. For example,
+given the \c{include/@false *.a@false} filters, static libraries will still be
+built (unless arranged not to with \c{config.bin.lib}) and the \c{pkg-config}
+files will still end up with \c{-I} options pointing to the header
+installation directory. Note also that this mechanism applies to both
+\c{install} and \c{uninstall} operations.
+
+\N|If you are familiar with the Debian or Fedora packaging, this mechanism is
+somewhat similar to (and can be used for a similar purpose as) the Debian's
+\c{.install} files and Fedora's \c{%files} spec file sections, which are used
+to split the installation into multiple binary packages.|
+
+As another example, the following filters will omit all the
+development-related files (headers, \c{pkg-config} files, static libraries,
+and shared library symlinks; assuming the platform uses the \c{.a}/\c{.so}
+extensions for the libraries):
+
+\
+$ b install !config.install.filter='
+ include/@false
+ pkgconfig/@false
+ \"lib/*.a\"@false
+ \"lib/*.so\"@false,symlink'
+\
+
+
\h1#module-version|\c{version} Module|
A project can use any version format as long as it meets the package version
diff --git a/libbuild2/cc/functions.cxx b/libbuild2/cc/functions.cxx
index 94900ee..9d408af 100644
--- a/libbuild2/cc/functions.cxx
+++ b/libbuild2/cc/functions.cxx
@@ -52,7 +52,7 @@ namespace build2
//
if (bs->ctx.phase != run_phase::match &&
bs->ctx.phase != run_phase::execute)
- fail << f.name << " can only be called during execution";
+ fail << f.name << " can only be called from recipe";
const module* m (rs->find_module<module> (d.x));
@@ -131,7 +131,7 @@ namespace build2
if (bs->ctx.phase != run_phase::match && // See above.
bs->ctx.phase != run_phase::execute)
- fail << f.name << " can only be called during execution";
+ fail << f.name << " can only be called from recipe";
const module* m (rs->find_module<module> (d.x));
diff --git a/libbuild2/filesystem.hxx b/libbuild2/filesystem.hxx
index 2998cec..7b45a08 100644
--- a/libbuild2/filesystem.hxx
+++ b/libbuild2/filesystem.hxx
@@ -22,6 +22,8 @@
//
namespace build2
{
+ using butl::entry_type;
+
using butl::auto_rmfile;
using butl::auto_rmdir;
diff --git a/libbuild2/install/functions.cxx b/libbuild2/install/functions.cxx
index 9f5fa44..d62b578 100644
--- a/libbuild2/install/functions.cxx
+++ b/libbuild2/install/functions.cxx
@@ -5,6 +5,7 @@
#include <libbuild2/variable.hxx>
#include <libbuild2/install/utility.hxx>
+#include <libbuild2/install/operation.hxx>
namespace build2
{
@@ -17,6 +18,8 @@ namespace build2
// $install.resolve(<dir>[, <rel_base>])
//
+ // @@ TODO: add overload to call resolve_file().
+ //
// Resolve potentially relative install.* value to an absolute and
// normalized directory based on (other) install.* values visible from
// the calling scope.
@@ -80,6 +83,70 @@ namespace build2
move (dir),
rel_base ? move (*rel_base) : dir_path ());
};
+
+ // @@ TODO: add $install.chroot().
+
+ // $install.filter(<path>[, <type>])
+ //
+ // Apply filters from config.install.filter and return true if the
+ // specified filesystem entry should be installed/uninstalled. Note that
+ // the entry is specified as an absolute and normalized installation
+ // path (so not $path($>) but $install.resolve($>)).
+ //
+ // The type argument can be one of `regular`, `directory`, or `symlink`.
+ // If unspecified, either `directory` or `regular` is assumed, based on
+ // whether path is syntactially a directory (ends with a directory
+ // separator).
+ //
+ // Note that this function is not pure and can only be called from a
+ // install or uninstall operation recipe.
+ //
+ f.insert (".filter", false) += [] (const scope* s,
+ path p,
+ optional<names> ot)
+ {
+ if (s == nullptr)
+ fail << "install.filter() called out of scope" << endf;
+
+ context& ctx (s->ctx);
+
+ if (ctx.phase != run_phase::match &&
+ ctx.phase != run_phase::execute)
+ fail << "install.filter() can only be called from recipe";
+
+ if (ctx.current_inner_oif != &op_install &&
+ ctx.current_inner_oif != &op_uninstall)
+ fail << "install.filter() can only be called during install/uninstall";
+
+ entry_type t;
+ if (ot)
+ {
+ string v (convert<string> (move (*ot)));
+
+ if (v == "regular") t = entry_type::regular;
+ else if (v == "directory") t = entry_type::directory;
+ else if (v == "symlink") t = entry_type::symlink;
+ else throw invalid_argument ("unknown type '" + v + '\'');
+ }
+ else
+ t = p.to_directory () ? entry_type::directory : entry_type::regular;
+
+ // Split into directory and leaf.
+ //
+ dir_path d;
+ if (t == entry_type::directory)
+ {
+ d = path_cast<dir_path> (move (p));
+ p = path (); // No leaf.
+ }
+ else
+ {
+ d = p.directory ();
+ p.make_leaf ();
+ }
+
+ return context_data::filter (*s->root_scope (), d, p, t);
+ };
}
}
}
diff --git a/libbuild2/install/init.cxx b/libbuild2/install/init.cxx
index f0402ca..69f578b 100644
--- a/libbuild2/install/init.cxx
+++ b/libbuild2/install/init.cxx
@@ -421,9 +421,10 @@ namespace build2
using config::lookup_config;
using config::specified_config;
- // Note: ignore config.install.{scope,manifest} (see below).
+ // Note: ignore config.install.{scope,filter,manifest} (see below).
//
- bool s (specified_config (rs, "install", {"scope", "manifest"}));
+ bool s (specified_config (
+ rs, "install", {"scope", "filter", "manifest"}));
// Adjust module priority so that the (numerous) config.install.*
// values are saved at the end of config.build.
@@ -460,6 +461,77 @@ namespace build2
config::unsave_variable (rs, v);
}
+ // config.install.filter
+ //
+ // Installation filterting. The value of this variable is a list of
+ // key-value pairs that specify the filesystem entries to include or
+ // exclude from the installation. For example, the following filters
+ // will omit installing headers and static libraries (notice the
+ // quoting of the wildcard).
+ //
+ // !config.install.filter='include/@false "*.a"@false'
+ //
+ // The key in each pair is a file or directory path or a path wildcard
+ // pattern. If a key is relative and contains a directory component or
+ // is a directory, then it is treated relative to the corresponding
+ // config.install.* location. Otherwise (simple path, normally a
+ // pattern), it is matched against the leaf of any path. Note that if
+ // an absolute path is specified, it should be without the
+ // config.install.chroot prefix.
+ //
+ // The value in each pair is either true (include) or false (exclude).
+ // The filters are evaluated in the order specified and the first
+ // match that is found determines the outcome. If no match is found,
+ // the default is to include. For a directory, while false means
+ // exclude all the sub-paths inside this directory, true does not mean
+ // that all the sub-paths will be included wholesale. Rather, the
+ // matched component of the sub-path is treated as included with the
+ // rest of the components matched against the following
+ // sub-filters. For example:
+ //
+ // !config.install.filter='
+ // include/x86_64-linux-gnu/@true
+ // include/x86_64-linux-gnu/details/@false
+ // include/@false'
+ //
+ // The true or false value may be followed by comma and the `symlink`
+ // modifier to only apply to symlink filesystem entries. For example:
+ //
+ // !config.install.filter='"*.so"@false,symlink'
+ //
+ // Note that this mechanism only affects what gets physically copied
+ // to the installation directory without affecting what gets built for
+ // install or the view of what gets installed at the buildfile level.
+ // For example, given the `include/@false *.a@false` filters, static
+ // libraries will still be built (unless arranged not to with
+ // config.bin.lib) and the pkg-config files will still end up with -I
+ // options pointing to the header installation directory. Note also
+ // that this mechanism applies to both install and uninstall
+ // operations.
+ //
+ // If you are familiar with the Debian or Fedora packaging, this
+ // mechanism is somewhat similar to (and can be used for a similar
+ // purpose as) the Debian's .install files and Fedora's %files spec
+ // file sections that are used to split the installation into multiple
+ // binary packages.
+ //
+ // Note: can only be specified as a global override.
+ //
+ {
+ auto& v (vp.insert<filters> ("config.install.filter"));
+
+ // If specified, verify it is a global override.
+ //
+ if (lookup l = rs[v])
+ {
+ if (!l.belongs (rs.global_scope ()))
+ fail << "config.install.filter must be a global override" <<
+ info << "specify !config.install.filter=...";
+ }
+
+ config::unsave_variable (rs, v);
+ }
+
// config.install.manifest
//
// Installation manifest. Valid values are a file path or `-` to dump
diff --git a/libbuild2/install/operation.cxx b/libbuild2/install/operation.cxx
index 95b4381..1b63bc0 100644
--- a/libbuild2/install/operation.cxx
+++ b/libbuild2/install/operation.cxx
@@ -19,10 +19,255 @@ namespace build2
{
namespace install
{
+ bool context_data::
+ filter (const scope& rs,
+ const dir_path& base,
+ const path& leaf,
+ entry_type type)
+ {
+ assert (type != entry_type::unknown &&
+ (type == entry_type::directory) == leaf.empty ());
+
+ context& ctx (rs.ctx);
+
+ auto& d (*static_cast<context_data*> (ctx.current_inner_odata.get ()));
+
+ if (d.filters == nullptr || d.filters->empty ())
+ return true;
+
+ tracer trace ("install::context_data::filter");
+
+ // Parse, resolve, and apply each filter in order.
+ //
+ // If redoing all this work for every entry proves too slow, we can
+ // consider some form of caching (e.g., on the per-project basis).
+ //
+ size_t limit (0); // See below.
+
+ for (const pair<string, string>& kv: *d.filters)
+ {
+ path k;
+ try
+ {
+ k = path (kv.first);
+
+ if (k.absolute ())
+ k.normalize ();
+ }
+ catch (const invalid_path&)
+ {
+ fail << "invalid path '" << kv.first << "' in config.install.filter "
+ << "value";
+ }
+
+ bool v;
+ {
+ const string& s (kv.second);
+
+ size_t p (s.find (','));
+
+ if (s.compare (0, p, "true") == 0)
+ v = true;
+ else if (s.compare (0, p, "false") == 0)
+ v = false;
+ else
+ fail << "expected true or false instead of '" << string (s, 0, p)
+ << "' in config.install.filter value";
+
+ if (p != string::npos)
+ {
+ if (s.compare (p + 1, string::npos, "symlink") == 0)
+ {
+ if (type != entry_type::symlink)
+ continue;
+ }
+ else
+ fail << "unknown modifier '" << string (s, p + 1) << "' in "
+ << "config.install.filter value";
+ }
+ }
+
+ // @@ TODO (see below for all the corner cases). Note that in a sense
+ // we already have the match file in any subdirectory support via
+ // simple patterns so perhaps this is not worth the trouble. Or we
+ // could support some limited form (e.g., `**` should be in the
+ // last component). But it may still be tricky to determine if
+ // it is a sub-filter.
+ //
+ if (path_pattern_recursive (k))
+ fail << "recursive wildcard pattern '" << kv.first << "' in "
+ << "config.install.filter value";
+
+ if (k.simple () && !k.to_directory ())
+ {
+ // Simple name/pattern matched against the leaf.
+ //
+ // @@ What if it is `**`?
+ //
+ if (path_pattern (k))
+ {
+ if (!path_match (leaf, k))
+ continue;
+ }
+ else
+ {
+ if (k != leaf)
+ continue;
+ }
+ }
+ else
+ {
+ // Split into directory and leaf.
+ //
+ // @@ What if leaf is `**`?
+ //
+ dir_path d;
+ if (k.to_directory ())
+ {
+ d = path_cast<dir_path> (move (k));
+ k = path (); // No leaf.
+ }
+ else
+ {
+ d = k.directory ();
+ k.make_leaf ();
+ }
+
+ // Resolve relative directory.
+ //
+ // Note that this resolution is potentially project-specific (that
+ // is, different projects may have different install.* locaitons).
+ //
+ // Note that if the first component is/contains a wildcard (e.g.,
+ // `*/`), then the resulution will fail, which feels correct (what
+ // does */ mean?).
+ //
+ if (d.relative ())
+ {
+ // @@ Strictly speaking, this should be base, not root scope.
+ //
+ d = resolve_dir (rs, move (d));
+ }
+
+ // Return the number of path components in the path.
+ //
+ auto path_comp = [] (const path& p)
+ {
+ size_t n (0);
+ for (auto i (p.begin ()); i != p.end (); ++i)
+ ++n;
+ return n;
+ };
+
+ // We need the sub() semantics but which uses pattern match instead
+ // of equality for the prefix. Looks like chopping off the path and
+ // calling path_match() on that is the best we can do.
+ //
+ // @@ Assumes no `**` components.
+ //
+ auto path_sub = [&path_comp] (const dir_path& ent,
+ const dir_path& pat,
+ size_t n = 0)
+ {
+ if (n == 0)
+ n = path_comp (pat);
+
+ dir_path p;
+ for (auto i (ent.begin ()); n != 0 && i != ent.end (); --n, ++i)
+ p.combine (*i, i.separator ());
+
+ return path_match (p, pat);
+ };
+
+ // The following checks should continue on no match and fall through
+ // to return.
+ //
+ if (k.empty ()) // Directory.
+ {
+ // Directories have special semantics.
+ //
+ // Consider this sequence of filters:
+ //
+ // include/x86_64-linux-gnu/@true
+ // include/x86_64-linux-gnu/details/@false
+ // include/@false
+ //
+ // It seems the semantics we want is that only subcomponent
+ // filters should apply. Maybe remember the latest matched
+ // directory as a current limit? But perhaps we don't need to
+ // remember the directory itself but the number of path
+ // components?
+ //
+ // I guess for patterns we will use the actual matched directory,
+ // not the pattern, to calculate the limit? @@ Because we
+ // currently don't support `**`, we for now can count components
+ // in the pattern.
+
+ // Check if this is a sub-filter.
+ //
+ size_t n (path_comp (d));
+ if (n <= limit)
+ continue;
+
+ if (path_pattern (d))
+ {
+ if (!path_sub (base, d, n))
+ continue;
+ }
+ else
+ {
+ if (!base.sub (d))
+ continue;
+ }
+
+ if (v)
+ {
+ limit = n;
+ continue; // Continue looking for sub-filters.
+ }
+ }
+ else
+ {
+ if (path_pattern (d))
+ {
+ if (!path_sub (base, d))
+ continue;
+ }
+ else
+ {
+ if (!base.sub (d))
+ continue;
+ }
+
+ if (path_pattern (k))
+ {
+ // @@ Does not handle `**`.
+ //
+ if (!path_match (leaf, k))
+ continue;
+ }
+ else
+ {
+ if (k != leaf)
+ continue;
+ }
+ }
+ }
+
+ l4 ([&]{trace << (base / leaf)
+ << (v ? " included by " : " excluded by ")
+ << kv.first << '@' << kv.second;});
+ return v;
+ }
+
+ return true;
+ }
+
#ifndef BUILD2_BOOTSTRAP
- install_context_data::
- install_context_data (const path* mf)
- : manifest_name (mf),
+ context_data::
+ context_data (const install::filters* fs, const path* mf)
+ : filters (fs),
+ manifest_name (mf),
manifest_os (mf != nullptr
? open_file_or_stdout (manifest_name, manifest_ofs)
: manifest_ofs),
@@ -38,7 +283,7 @@ namespace build2
}
static path
- relocatable_path (install_context_data& d, const target& t, path p)
+ relocatable_path (context_data& d, const target& t, path p)
{
// This is both inefficient (re-detecting relocatable manifest for every
// path) and a bit dirty (if multiple projects are being installed with
@@ -101,7 +346,7 @@ namespace build2
// symlinks belong to tragets, directories do not.
//
static void
- manifest_flush_target (install_context_data& d, const target* tgt)
+ manifest_flush_target (context_data& d, const target* tgt)
{
if (d.manifest_target != nullptr)
{
@@ -163,14 +408,13 @@ namespace build2
d.manifest_target = tgt;
}
- void install_context_data::
+ void context_data::
manifest_install_d (context& ctx,
const target& tgt,
const dir_path& dir,
const string& mode)
{
- auto& d (
- *static_cast<install_context_data*> (ctx.current_inner_odata.get ()));
+ auto& d (*static_cast<context_data*> (ctx.current_inner_odata.get ()));
if (d.manifest_name.path != nullptr)
{
@@ -200,15 +444,14 @@ namespace build2
}
}
- void install_context_data::
+ void context_data::
manifest_install_f (context& ctx,
const target& tgt,
const dir_path& dir,
const path& name,
const string& mode)
{
- auto& d (
- *static_cast<install_context_data*> (ctx.current_inner_odata.get ()));
+ auto& d (*static_cast<context_data*> (ctx.current_inner_odata.get ()));
if (d.manifest_name.path != nullptr)
{
@@ -220,15 +463,14 @@ namespace build2
}
}
- void install_context_data::
+ void context_data::
manifest_install_l (context& ctx,
const target& tgt,
const path& link_target,
const dir_path& dir,
const path& link)
{
- auto& d (
- *static_cast<install_context_data*> (ctx.current_inner_odata.get ()));
+ auto& d (*static_cast<context_data*> (ctx.current_inner_odata.get ()));
if (d.manifest_name.path != nullptr)
{
@@ -243,8 +485,7 @@ namespace build2
static void
manifest_close (context& ctx)
{
- auto& d (
- *static_cast<install_context_data*> (ctx.current_inner_odata.get ()));
+ auto& d (*static_cast<context_data*> (ctx.current_inner_odata.get ()));
if (d.manifest_name.path != nullptr)
{
@@ -271,12 +512,13 @@ namespace build2
}
}
#else
- install_context_data::
- install_context_data (const path*)
+ context_data::
+ context_data (const install::filters* fs, const path*)
+ : filters (fs)
{
}
- void install_context_data::
+ void context_data::
manifest_install_d (context&,
const target&,
const dir_path&,
@@ -284,7 +526,7 @@ namespace build2
{
}
- void install_context_data::
+ void context_data::
manifest_install_f (context&,
const target&,
const dir_path&,
@@ -293,7 +535,7 @@ namespace build2
{
}
- void install_context_data::
+ void context_data::
manifest_install_l (context&,
const target&,
const path&,
@@ -341,20 +583,48 @@ namespace build2
if (inner)
{
- // See if we need to write the installation manifest.
+ // See if we need to filter and/or write the installation manifest.
//
// Note: go straight for the public variable pool.
//
- const variable& var (*ctx.var_pool.find ("config.install.manifest"));
- const path* mf (cast_null<path> (ctx.global_scope[var]));
+ const filters* fs (
+ cast_null<filters> (
+ ctx.global_scope[*ctx.var_pool.find ("config.install.filter")]));
+
+ const path* mf (
+ cast_null<path> (
+ ctx.global_scope[*ctx.var_pool.find ("config.install.manifest")]));
// Note that we cannot calculate whether the manifest should use
// relocatable (relative) paths once here since we don't know the
// value of config.install.root.
ctx.current_inner_odata = context::current_data_ptr (
- new install_context_data (mf),
- [] (void* p) {delete static_cast<install_context_data*> (p);});
+ new context_data (fs, mf),
+ [] (void* p) {delete static_cast<context_data*> (p);});
+ }
+ }
+
+ static void
+ uninstall_pre (context& ctx,
+ const values& params,
+ bool inner,
+ const location& l)
+ {
+ // Note: a subset of install_pre().
+ //
+ if (!params.empty ())
+ fail (l) << "unexpected parameters for operation uninstall";
+
+ if (inner)
+ {
+ const filters* fs (
+ cast_null<filters> (
+ ctx.global_scope[*ctx.var_pool.find ("config.install.filter")]));
+
+ ctx.current_inner_odata = context::current_data_ptr (
+ new context_data (fs, nullptr),
+ [] (void* p) {delete static_cast<context_data*> (p);});
}
}
@@ -412,7 +682,7 @@ namespace build2
0 /* concurrency */, // Run serially
&pre_uninstall,
nullptr,
- nullptr,
+ &uninstall_pre,
nullptr,
nullptr,
nullptr
diff --git a/libbuild2/install/operation.hxx b/libbuild2/install/operation.hxx
index 4983976..d71d8f3 100644
--- a/libbuild2/install/operation.hxx
+++ b/libbuild2/install/operation.hxx
@@ -4,15 +4,15 @@
#ifndef LIBBUILD2_INSTALL_OPERATION_HXX
#define LIBBUILD2_INSTALL_OPERATION_HXX
-#include <libbuild2/types.hxx>
-#include <libbuild2/utility.hxx>
-
#ifndef BUILD2_BOOTSTRAP
# include <libbutl/json/serializer.hxx>
#endif
+#include <libbuild2/types.hxx>
+#include <libbuild2/utility.hxx>
+
#include <libbuild2/operation.hxx>
-#include <libbuild2/filesystem.hxx> // auto_rmfile
+#include <libbuild2/filesystem.hxx> // auto_rmfile, entry_type
namespace build2
{
@@ -22,10 +22,27 @@ namespace build2
extern const operation_info op_uninstall;
extern const operation_info op_update_for_install;
- // Set as context::current_inner_odata during the install inner operation.
+ using filters = vector<pair<string, string>>;
+
+ // Set as context::current_inner_odata during the install/uninstall inner
+ // operations.
//
- struct install_context_data
+ struct context_data
{
+ // Filters.
+ //
+ const install::filters* filters;
+
+ // If entry type is a directory, then leaf must be empty.
+ //
+ static bool
+ filter (const scope& rs,
+ const dir_path& base,
+ const path& leaf,
+ entry_type);
+
+ // Manifest.
+ //
#ifndef BUILD2_BOOTSTRAP
path manifest_file; // Absolute and normalized, empty if `-`.
path_name manifest_name; // Original path/name.
@@ -43,9 +60,6 @@ namespace build2
vector<manifest_target_entry> manifest_target_entries;
#endif
- explicit
- install_context_data (const path* manifest);
-
// The following manifest_install_[dfl]() functions correspond to (and
// are called from) file_rule::install_[dfl]().
@@ -74,6 +88,11 @@ namespace build2
const path& link_target,
const dir_path& dir,
const path& link);
+
+ // Constructor.
+ //
+ explicit
+ context_data (const install::filters*, const path* manifest);
};
}
}
diff --git a/libbuild2/install/rule.cxx b/libbuild2/install/rule.cxx
index 5a8242b..f8e3e05 100644
--- a/libbuild2/install/rule.cxx
+++ b/libbuild2/install/rule.cxx
@@ -790,6 +790,8 @@ namespace build2
const file& t,
uint16_t verbosity)
{
+ assert (d.absolute ());
+
context& ctx (rs.ctx);
// Here is the problem: if this is a dry-run, then we will keep showing
@@ -805,7 +807,8 @@ namespace build2
// Note that this also means we won't have the directory entries in the
// manifest created with dry-run. Probably not a big deal.
//
- if (ctx.dry_run)
+ if (ctx.dry_run ||
+ !context_data::filter (rs, d, path (), entry_type::directory))
return;
dir_path chd (chroot_path (rs, d));
@@ -870,7 +873,7 @@ namespace build2
pp, args,
verb >= verbosity ? 1 : verb_never /* finish_verbosity */);
- install_context_data::manifest_install_d (ctx, t, d, *base.dir_mode);
+ context_data::manifest_install_d (ctx, t, d, *base.dir_mode);
}
void file_rule::
@@ -881,8 +884,15 @@ namespace build2
const path& f,
uint16_t verbosity)
{
+ assert (name.empty () || name.simple ());
+
context& ctx (rs.ctx);
+ const path& leaf (name.empty () ? f.leaf () : name);
+
+ if (!context_data::filter (rs, base.dir, leaf, entry_type::regular))
+ return;
+
path relf (relative (f));
dir_path chd (chroot_path (rs, base.dir));
@@ -934,12 +944,7 @@ namespace build2
pp, args,
verb >= verbosity ? 1 : verb_never /* finish_verbosity */);
- install_context_data::manifest_install_f (
- ctx,
- t,
- base.dir,
- name.empty () ? f.leaf () : name,
- *base.mode);
+ context_data::manifest_install_f (ctx, t, base.dir, leaf, *base.mode);
}
void file_rule::
@@ -950,8 +955,13 @@ namespace build2
const path& link_target,
uint16_t verbosity)
{
+ assert (link.simple () && !link.empty ());
+
context& ctx (rs.ctx);
+ if (!context_data::filter (rs, base.dir, link, entry_type::symlink))
+ return;
+
if (link_target.absolute () &&
cast_false<bool> (rs["install.relocatable"]))
{
@@ -1033,12 +1043,11 @@ namespace build2
}
#endif
- install_context_data::manifest_install_l (
- ctx,
- target,
- link_target,
- base.dir,
- link);
+ context_data::manifest_install_l (ctx,
+ target,
+ link_target,
+ base.dir,
+ link);
}
target_state file_rule::
@@ -1158,9 +1167,14 @@ namespace build2
const dir_path& d,
uint16_t verbosity)
{
+ assert (d.absolute ());
+
+ context& ctx (rs.ctx);
+
// See install_d() for the rationale.
//
- if (rs.ctx.dry_run)
+ if (ctx.dry_run ||
+ !context_data::filter (rs, d, path (), entry_type::directory))
return false;
dir_path chd (chroot_path (rs, d));
@@ -1241,10 +1255,10 @@ namespace build2
}
process pr (run_start (pp, args,
- 0 /* stdin */,
- 1 /* stdout */,
- diag_buffer::pipe (rs.ctx) /* stderr */));
- diag_buffer dbuf (rs.ctx, args[0], pr);
+ 0 /* stdin */,
+ 1 /* stdout */,
+ diag_buffer::pipe (ctx) /* stderr */));
+ diag_buffer dbuf (ctx, args[0], pr);
dbuf.read ();
r = run_finish_code (
dbuf,
@@ -1338,10 +1352,15 @@ namespace build2
const path& name,
uint16_t verbosity)
{
- assert (t != nullptr || !name.empty ());
+ assert (name.empty () ? t != nullptr : name.simple ());
+
+ const path& leaf (name.empty () ? t->path ().leaf () : name);
+
+ if (!context_data::filter (rs, base.dir, leaf, entry_type::regular))
+ return false;
dir_path chd (chroot_path (rs, base.dir));
- path f (chd / (name.empty () ? t->path ().leaf () : name));
+ path f (chd / leaf);
try
{
@@ -1380,6 +1399,11 @@ namespace build2
const path& /*link_target*/,
uint16_t verbosity)
{
+ assert (link.simple () && !link.empty ());
+
+ if (!context_data::filter (rs, base.dir, link, entry_type::symlink))
+ return false;
+
dir_path chd (chroot_path (rs, base.dir));
path f (chd / link);
diff --git a/libbuild2/install/rule.hxx b/libbuild2/install/rule.hxx
index b0dabe5..b319071 100644
--- a/libbuild2/install/rule.hxx
+++ b/libbuild2/install/rule.hxx
@@ -205,6 +205,8 @@ namespace build2
// install <file> <base>/ # if <name> is empty
// install <file> <base>/<name> # if <name> is not empty
//
+ // Note that <name> should be a simple path.
+ //
static void
install_f (const scope& rs,
const install_dir& base,
@@ -221,8 +223,9 @@ namespace build2
//
// ln -s <link_target> <base>/<link>
//
- // Note that <link_target> must not be absolute if relocatable
- // installation is requested (config.install.relocatable).
+ // Note that <link> should be a simple path. Note that <link_target>
+ // must not be absolute if relocatable installation is requested
+ // (config.install.relocatable).
//
// Note that the target argument only specifies which target this
// symlink "belongs" to.
@@ -267,9 +270,9 @@ namespace build2
//
// uninstall -d <dir>
//
- // We try to remove all the directories between base and dir but not base
- // itself unless base == dir. Return false if nothing has been removed
- // (i.e., the directories do not exist or are not empty).
+ // We try to remove all the directories between base and dir but not
+ // base itself unless base == dir. Return false if nothing has been
+ // removed (i.e., the directories do not exist or are not empty).
//
static bool
uninstall_d (const scope& rs,
diff --git a/libbuild2/utility.hxx b/libbuild2/utility.hxx
index 2cb0738..1e22e7e 100644
--- a/libbuild2/utility.hxx
+++ b/libbuild2/utility.hxx
@@ -100,6 +100,7 @@ namespace build2
// <libbutl/path-pattern.hxx>
//
using butl::path_pattern;
+ using butl::path_match;
// Perform process-wide initializations/adjustments/workarounds. Should be
// called once early in main(). In particular, besides other things, this