aboutsummaryrefslogtreecommitdiff
path: root/doc/packaging.cli
diff options
context:
space:
mode:
Diffstat (limited to 'doc/packaging.cli')
-rw-r--r--doc/packaging.cli162
1 files changed, 134 insertions, 28 deletions
diff --git a/doc/packaging.cli b/doc/packaging.cli
index 4189593..8ef8c1a 100644
--- a/doc/packaging.cli
+++ b/doc/packaging.cli
@@ -740,6 +740,14 @@ With the understanding of these key properties of upstream layout you should
be in a good position to start crafting the \l{bdep-new(1)} command line that
recreates it.
+\N|The \c{bdep-new} documentation uses a slightly more general terminology
+compared to what we used in the previous section in order to also be
+applicable to projects that use modules instead of headers.
+
+Specifically, the inclusion subdirectory (\c{foo/}) is called \i{source
+subdirectory} while the header directory (\c{include/}) and source directory
+(\c{src/}) are called \i{header prefix} and \i{source prefix}, respectively.|
+
\h2#core-package-craft-cmd|Craft \c{bdep new} command line to create package|
@@ -750,14 +758,6 @@ create the desired layout. If the layout you've got isn't quite right yet,
simply remove the package directory along with the \c{packages.manifest} file
and try again.
-\N|The \c{bdep-new} documentation uses a slightly more general terminology
-compared to what we used in the previous section in order to also be
-applicable to projects that use modules instead of headers.
-
-Specifically, the inclusion subdirectory (\c{foo/}) is called \i{source
-subdirectory} while the header directory (\c{include/}) and source directory
-(\c{src/}) are called \i{header prefix} and \i{source prefix}, respectively.|
-
Let's illustrate this approach on the original example of the split layout:
\
@@ -862,7 +862,7 @@ instead of source subdirectory. To illustrate the difference, compare these
two auto-generated layouts paying attention to the location of \c{buildfile}s:
\
-$ bdep new ... --type lib,split libfoo
+$ bdep new ... --type lib,split,subdir=foo libfoo
$ tree libfoo/
libfoo/
├── include/
@@ -876,7 +876,7 @@ libfoo/
\
\
-$ bdep new ... --type lib,split,buildfile-in-prefix libfoo
+$ bdep new ... --type lib,split,subdir=foo,buildfile-in-prefix libfoo
$ tree libfoo/
libfoo/
├── include/
@@ -1016,18 +1016,78 @@ wish to port, it is recommended that you use a copy of the generated
\c{tests/} subproject as a starting point (not forgeting to add the
corresponding entry in the root \c{buildfile}).|
-@@ 'Don't build your main targets in root buldfile' needs work (buildfile-in-prefix).
-@@ We can actually do the final creation here (with symlinking, etc).
+\h2#core-package-create|Create final package|
-@@ Adding additional subdirectories to avoid symlinking individual files.
- Ideally would want bdep-new mode.
+If you are satisfied with the \c{bdep-new} command line and there are no more
+automatic adjustments you can squeeze out of it, then it's time to re-run
+\c{bdep-new} one last time to create the final package.
-@@ Pre-symlink README, LICENSE, PACKAGE-README.md?
-@@ Auto-detect the license?
-@@ Where do we overlay the source code?
+\N|While redoing this step later will require more effort, especially if
+you've made manual modifications to \c{buildfile} and \c{manifest}, nothing is
+set in stone and it can be done again by simply removing the package directory
+and removing (or editing, if you have multiple packages and only want to redo
+some of them) \c{packages.manifest} and starting over.|
-@@ The Don't write buildfiles by hand entry is now duplicate/redundant.
+This time, however, we will do things a bit differently in order to take
+advantage of some additional automation offered by \c{bdep-new}. If the
+package directory already exists and contains certain files, \c{bdep-new} can
+take this into account when generating the root \c{buildfile} and package
+\c{manifest}. In particular, it will try to guess the license from the
+\c{LICENSE} file and extract the summary from \c{README.md} and use this
+information in \c{manifest}.
+
+\N|If the file names or formats used by upstream don't match those recognized
+by \c{bdep-new} or if an attempt to extra the information is unsuccessful,
+then for now simply omit the corresponding files from the package directory
+and add them later manually.
+
+Specifically, for \c{README}, \c{bdep-new} only recognizes \c{README.md}.
+
+For license files, \c{bdep-new} recognizes \c{LICENSE}, \c{LICENSE.txt}
+\c{LICENSE.md}, \c{COPYING}, and \c{UNLICENSE}.
+
+
+@@ TODO: PACKAGE-README.md and README-PACKAGE.md (and below)
+
+|
+
+Continuing with our \c{libfoo} example and assuming upstream provides the
+\c{README.md} and \c{LICENSE} files, we first manually create the package
+directory, then add the symlinks, and finally run \c{bdep-new} (notice that we
+have omitted the package name from the \c{bdep-new} command line since we are
+running from inside the package directory):
+
+\
+$ cd foo/ # Change to the package repository root.
+$ rm -r libfoo/ packages.manifest
+$ cd foo/ # Change to the package root.
+
+$ mkdir libfoo/
+$ ln -s ../upstream/README.md ./
+$ ln -s ../upstream/LICENSE ./
+
+$ bdep new --package \
+ --lang c++,cpp \
+ --type lib,split,subdir=foo,no-subdir-source,no-version,no-symexport
+\
+
+If auto-detection succeeds, then you should see the \c{summary} and
+\c{license} values automatically populated in \c{manifest} and the symlinked
+files listed in the root \c{buildfile}.
+
+
+\h#core-adjust|Fill package and adjust \c{buildfiles}, \c{manifest}, etc|
+
+@@ What should be the order? E.g., cannot build without dependencies.
+
+ - when do we bdep-init it? Maybe do it with generated code?
+
+@@ repository.manifest if have dependencies
+
+@@ Any other upstream files besides source? Doc?
+
+@@ The 'Don't write buildfiles by hand entry' is now mostly duplicate/redundant.
======================================================================
@@ -1259,10 +1319,15 @@ thus the \c{buildfile} that defines this target must be loaded), your entire
project will be loaded, including any \c{tests/} and \c{examples/} subproject,
which is wasteful.
-Note also that it's easy to continue symlinking entire directories from
-\c{upstream/} without moving everything to the root \c{buildfile} by simply
-creating another subdirectory. Let's look at a concrete example. Here is
-the directory structure where everything is in the root \c{buildfile}:
+
+If you want to continue symlinking entire directories from \c{upstream/} but
+without moving everything to the root \c{buildfile}, the recommended approach
+is to simply add another subdirectory level. Let's look at a few concrete
+example to illustrate the technique (see \l{#core-package-struct Decide on the
+package source code layout} for background on the terminology used).
+
+Here is the directory structure of a package which uses a combined layout (no
+header/source split) and where everything is in the root \c{buildfile}:
\
libigl-core/
@@ -1271,8 +1336,8 @@ libigl-core/
└── buildfile # Defines lib{igl-core}.
\
-And here is the alternative structure where we have added the \c{libigl-core}
-subdirectory with its own \c{buildfile}:
+And here is the alternative structure where we have added the extra
+\c{libigl-core} subdirectory with its own \c{buildfile}:
\
libigl-core/
@@ -1283,13 +1348,54 @@ libigl-core/
└── buildfile
\
-Below is the \l{bdep-new(1)} invocation that can be used to automatically
-create this alternative structure (see \l{bdep-new.xhtml#src-layout SOURCE
-LAYOUT} for details):
+Below is the \c{bdep-new} invocation that can be used to automatically
+create this alternative structure (see \l{#core-package-craft-cmd Craft
+\c{bdep\ new} command line to create package} for background and
+\l{bdep-new(1)} for details):
+
+\
+$ bdep new \
+ --type lib,prefix=libigl-core,subdir=igl,buildfile-in-prefix \
+ libigl-core
+\
+
+Let's also look at an example of a split layout, which may require a slightly
+different \c{bdep-new} sub-options to achieve the same result. Here is the
+layout which matched upstream exactly:
\
-$ bdep new -t lib,prefix=libigl-core,no-subdir,no-version libigl-core
+$ bdep new --type lib,split,subdir=foo,no-subdir-source libfoo
+$ tree libfoo
+libfoo/
+├── include/
+│   └── foo/
+│   ├── buildfile
+│   └── ...
+└── src/
+ ├── buildfile
+ └── ...
+\
+
+However, with this layout we will not be able to symlink the entire
+\c{include/foo/} and \c{src/} subdirectories because there are \c{buildfile}s
+inside (and which may tempt you to just move everything to the root
+\c{buidfile}). To fix this we can move the \c{buildfile}s out of source
+subdirectory \c{foo/} and into prefixes (\c{include/} and \c{src/}) using the
+\c{buildfile-in-prefix} sub-option. And since \c{src/} doesn't have a source
+subdirectory, we have to invent one:
+
\
+$ bdep new --type lib,split,subdir=foo,buildfile-in-prefix libfoo
+$ tree libfoo
+libfoo/
+├── include/
+│   ├── foo/ -> ../upstream/include/foo/
+│   └── buildfile
+└── src/
+ ├── foo/ -> ../upstream/src/
+ └── buildfile
+\
+
\h1#howto|Packaging HOWTO|