aboutsummaryrefslogtreecommitdiff
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/common.test13
-rw-r--r--tests/config.test30
-rw-r--r--tests/init.test29
-rw-r--r--tests/new.test10
-rw-r--r--tests/publish.test15
-rw-r--r--tests/status.test16
-rw-r--r--tests/sync.test30
-rw-r--r--tests/test.test8
8 files changed, 73 insertions, 78 deletions
diff --git a/tests/common.test b/tests/common.test
index f532d76..80d37d3 100644
--- a/tests/common.test
+++ b/tests/common.test
@@ -30,13 +30,10 @@ end
+echo "$git_version" | sed -e 's/(\d+).*/\1/' | set git_version_major
+echo "$git_version" | sed -e 's/\d+\.(\d+).*/\1/' | set git_version_minor
-# This flag must be used by testscripts to decide if they should skip git
-# repository-related tests or adjust bdep commands. Note that specific command
-# tests may still adjust this flag to express the higher requirements for the
-# minimum supported git version.
-#
-git_supported = ($git_version_major > 2 || \
- $git_version_major == 2 && $git_version_minor >= 1)
++if! ($git_version_major > 2 || \
+ $git_version_major == 2 && $git_version_minor >= 1)
+ exit "minimum supported git version is 2.1"
+end
# Helper commands that can be used by tests to prepare the testing environment
# or validate an outcome of the command being tested. They are likely to get
@@ -50,7 +47,7 @@ clean = $* clean
deinit = $* deinit
init = $* init
fetch = $* fetch
-new = $* new --no-checks --vcs ($git_supported ? git : none)
+new = $* new --no-checks
status = $* status
sync = $* sync
update = $* update
diff --git a/tests/config.test b/tests/config.test
index 7c03286..5beabcf 100644
--- a/tests/config.test
+++ b/tests/config.test
@@ -31,10 +31,10 @@ deinit += -d prj
$init @cfg 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$* list @cfg >>/"EOO";
@cfg $~/cfg-dir/ 1 default,forwarded,auto-synchronized
@@ -65,10 +65,10 @@ deinit += -d prj
$init @cfg 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$* list >>/"EOO";
@cfg $~/prj-cfg/ 1 default,forwarded,auto-synchronized
@@ -99,10 +99,10 @@ deinit += -d prj
$init -c cfg 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$* list >>/"EOO";
$~/cfg/ 1 default,forwarded,auto-synchronized
@@ -162,19 +162,19 @@ deinit += -d prj
initializing in project $~/prj/
in configuration @cfg1:
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
in configuration @cfg2:
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status --all >>~%EOO%;
+ $status --all >>EOO;
in configuration @cfg1:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
in configuration @cfg2:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
EOO
$* list >>/"EOO";
@@ -218,7 +218,7 @@ deinit += -d prj
$init @cfg 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
mv prj-cfg prj-cfg2;
@@ -252,7 +252,7 @@ deinit += -d prj
$init @cfg 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
$* rename @cfg cfg2 2>>/"EOE";
@@ -300,8 +300,8 @@ deinit += -d prj
removed configuration @cfg1 $~/prj-cfg1/ 1
EOE
- $status --all >>~%EOO%;
- %prj configured 0\.1\.0-a\.0\..+%
+ $status --all >>EOO;
+ prj configured 0.1.0-a.0.19700101000000
EOO
$* list >>/"EOO";
diff --git a/tests/init.test b/tests/init.test
index 2fb3945..8915189 100644
--- a/tests/init.test
+++ b/tests/init.test
@@ -24,13 +24,13 @@ deinit += -d prj
initializing in project $~/prj/
created configuration @cfg $~/prj-cfg/ 1 default,forwarded,auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
sed -n -e 's/^config.cc.poptions = (.+)$/\1/p' prj-cfg/build/config.build \
>'-DTEST';
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$build prj/ 2>>/EOE;
mkdir prj-cfg/prj/fsdir{prj/}
@@ -72,22 +72,22 @@ deinit += -d prj
initializing in project $~/prj/
added configuration @cfg1 $~/prj-cfg1/ 1 default,forwarded,auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
$* -A prj-cfg2 @cfg2 2>>/~"%EOE%";
initializing in project $~/prj/
added configuration @cfg2 $~/prj-cfg2/ 2 auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status --all >>~%EOO%;
+ $status --all >>EOO;
in configuration @cfg1:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
in configuration @cfg2:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
EOO
$build prj-cfg1/ 2>>/~%EOE%;
@@ -134,10 +134,10 @@ deinit += -d prj
initializing in project $~/prj/
created configuration @cfg $~/prj-cfg/ 1 default,forwarded,auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$build prj/ 2>>/EOE;
mkdir prj-cfg/prj/fsdir{prj/}
@@ -150,10 +150,7 @@ deinit += -d prj
#
mkdir --no-cleanup prj/prj.pkg;
- mv prj/prj prj/build prj/buildfile prj/manifest prj/prj.pkg/;
- if ($git_supported)
- mv prj/.gitignore prj/prj.pkg/
- end;
+ mv prj/prj prj/build prj/buildfile prj/manifest prj/.gitignore prj/prj.pkg/;
mv prj/prj.pkg prj/prj;
cat <<EOI >=prj/packages.manifest;
@@ -170,8 +167,8 @@ deinit += -d prj
$init --all -d prj/libprj 2>>/~"%EOE%";
initializing in project $~/prj/
synchronizing:
- % upgrade prj.+#1%
- % new libprj.+%
+ % upgrade prj.+19700101000000#1%
+ % new libprj.+19700101000000%
EOE
# Factor out some of the executable package functionality into the library.
@@ -204,7 +201,7 @@ deinit += -d prj
$build prj-cfg/prj/ 2>>/~"%EOE%";
synchronizing $~/prj-cfg/:
- % upgrade prj.+#2%
+ % upgrade prj.+19700101000000#2%
%mkdir prj-cfg/.+%{2}
%.{3}
%ld prj-cfg/.+%{2}
diff --git a/tests/new.test b/tests/new.test
index 089be60..3a62df3 100644
--- a/tests/new.test
+++ b/tests/new.test
@@ -6,7 +6,7 @@
# Disable nesting checks in the created projects.
#
-test.arguments += --no-checks --vcs ($git_supported ? git : none)
+test.arguments += --no-checks
cxx = "config.cxx=$config.cxx"
@@ -104,10 +104,10 @@ status += -d prj
created new executable project prj in $~/prj/
created configuration @cfg $~/prj-config/ 1 default,forwarded,auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$build prj/ 2>>/EOE
mkdir prj-config/prj/fsdir{prj/}
@@ -129,10 +129,10 @@ status += -d prj
created new executable project prj in $~/prj/
created configuration @cfg $~/prj-cfg/ 1 default,forwarded,auto-synchronized
synchronizing:
- % new prj.+%
+ % new prj.+19700101000000%
EOE
- $status >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $status >'prj configured 0.1.0-a.0.19700101000000';
$build prj/ 2>>/EOE
mkdir prj-cfg/prj/fsdir{prj/}
diff --git a/tests/publish.test b/tests/publish.test
index 8541d9c..d8d86d8 100644
--- a/tests/publish.test
+++ b/tests/publish.test
@@ -4,6 +4,14 @@
.include common.test project.test
+# bdep-publish requirements for the minimum supported git version are higher
+# then the default 2.1 (see bdep/publish.cxx for details).
+#
++if! ($git_version_major > 2 || \
+ $git_version_major == 2 && $git_version_minor >= 12)
+ exit
+end
+
# Repository to use for the package submissions simulation.
#
# Note: could use empty config.bdep.test.repository value to suppress
@@ -24,12 +32,6 @@ init += $cxx -d prj 2>! &prj/**/bootstrap/***
windows = ($cxx.target.class == 'windows')
-# bdep-publish requirements for the minimum supported git version are higher
-# then the default 2.1 (see bdep/publish.cxx for details).
-#
-git_supported = ($git_version_major > 2 || \
- $git_version_major == 2 && $git_version_minor >= 12)
-
# Note that using the same package name and version for tests may result in
# duplicate submissions. We will use unique version for each test,
# incrementing the patch version for 1.0.X.
@@ -230,7 +232,6 @@ git_supported = ($git_version_major > 2 || \
: control
:
-if ($git_supported)
{
# The control repository URL doesn't really matter for the submission
# simulation. We specify it to enable the control branch-related
diff --git a/tests/status.test b/tests/status.test
index 12ccc34..676dac0 100644
--- a/tests/status.test
+++ b/tests/status.test
@@ -29,7 +29,7 @@ deinit += -d prj
$init -C @cfg &prj-cfg/***;
- $* >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $* >'prj configured 0.1.0-a.0.19700101000000';
$deinit 2>>/"EOE"
deinitializing in project $~/prj/
@@ -46,14 +46,14 @@ deinit += -d prj
$init -C @cfg1 &prj-cfg1/***;
$init -C @cfg2 &prj-cfg2/***;
- $* @cfg2 >~'%prj configured 0\.1\.0-a\.0\..+%';
+ $* @cfg2 >'prj configured 0.1.0-a.0.19700101000000';
- $* --all >>~%EOO%;
+ $* --all >>EOO;
in configuration @cfg1:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
in configuration @cfg2:
- %prj configured 0\.1\.0-a\.0\..+%
+ prj configured 0.1.0-a.0.19700101000000
EOO
$deinit 2>>/"EOE"
@@ -83,8 +83,8 @@ deinit += -d prj
depends: libprj
EOI
- $* --recursive >>~%EOO% 2>>/"EOE"; # Note: implicitly fetches in cfg.
- %prj configured 0\.1\.0-a\.0\..+ available 0\.1\.0-a\.0\..+#1%
+ $* --recursive >>EOO 2>>/"EOE"; # Note: implicitly fetches in cfg.
+ prj configured 0.1.0-a.0.19700101000000 available 0.1.0-a.0.19700101000000#1
EOO
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
EOE
@@ -92,7 +92,7 @@ deinit += -d prj
$sync;
$* --recursive >>~%EOO%;
- %prj configured 0\.1\.0-a\.0\..+#1%
+ prj configured 0.1.0-a.0.19700101000000#1
% libprj configured 0.+%
EOO
diff --git a/tests/sync.test b/tests/sync.test
index 842c2e1..c086a02 100644
--- a/tests/sync.test
+++ b/tests/sync.test
@@ -55,11 +55,11 @@ deinit += -d prj
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
synchronizing:
% new libprj.+ \\\(required by prj\\\)%
- % upgrade prj.+#1%
+ % upgrade prj.+19700101000000#1%
EOE
- $status >>~"%EOO%";
- %prj configured 0\.1\.0-a\.0\..+#1%
+ $status >>~%EOO%;
+ prj configured 0.1.0-a.0.19700101000000#1
% libprj configured 0.+%
EOO
@@ -140,19 +140,19 @@ deinit += -d prj
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
synchronizing:
% new libprj.+ \\\(required by pkg1\\\)%
- % upgrade pkg1.+#1%
- % upgrade pkg2.+#1%
+ % upgrade pkg1.+19700101000000#1%
+ % upgrade pkg2.+19700101000000#1%
EOE
$status >>~%EOO% 2>>/~"%EOE%"; # Note: implicitly fetches into cfg2.
in configuration @cfg1:
- %pkg1 configured 0\.1\.0-a\.0\..+#1%
+ pkg1 configured 0.1.0-a.0.19700101000000#1
% libprj configured 0.+%
- %pkg2 configured 0\.1\.0-a\.0\..+#1%
+ pkg2 configured 0.1.0-a.0.19700101000000#1
in configuration @cfg2:
- %pkg1 configured 0\.1\.0-a\.0\..+ available 0\.1\.0-a\.0\..+#1%
- %pkg2 configured 0\.1\.0-a\.0\..+ available 0\.1\.0-a\.0\..+#1%
+ pkg1 configured 0.1.0-a.0.19700101000000 available 0.1.0-a.0.19700101000000#1
+ pkg2 configured 0.1.0-a.0.19700101000000 available 0.1.0-a.0.19700101000000#1
EOO
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
EOE
@@ -165,20 +165,20 @@ deinit += -d prj
in configuration @cfg2:
synchronizing:
% new libprj.+ \(required by pkg1\)%
- % upgrade pkg1/0\.1\.0-a\.0\..+#1%
- % upgrade pkg2/0\.1\.0-a\.0\..+#1%
+ upgrade pkg1/0.1.0-a.0.19700101000000#1
+ upgrade pkg2/0.1.0-a.0.19700101000000#1
EOE
$status >>~%EOE%;
in configuration @cfg1:
- %pkg1 configured 0\.1\.0-a\.0\..+#1%
+ pkg1 configured 0.1.0-a.0.19700101000000#1
% libprj configured 0.+%
- %pkg2 configured 0\.1\.0-a\.0\..+#1%
+ pkg2 configured 0.1.0-a.0.19700101000000#1
in configuration @cfg2:
- %pkg1 configured 0\.1\.0-a\.0\..+#1%
+ pkg1 configured 0.1.0-a.0.19700101000000#1
% libprj configured 0.+%
- %pkg2 configured 0\.1\.0-a\.0\..+#1%
+ pkg2 configured 0.1.0-a.0.19700101000000#1
EOE
$build prj/pkg1/ 2>>/~%EOE%;
diff --git a/tests/test.test b/tests/test.test
index 713a25f..33952d5 100644
--- a/tests/test.test
+++ b/tests/test.test
@@ -85,8 +85,8 @@ deinit += -d prj
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
synchronizing:
% new libprj.+ \\\(required by pkg1\\\)%
- % upgrade pkg1.+#1%
- % upgrade pkg2.+#1%
+ % upgrade pkg1.+19700101000000#1%
+ % upgrade pkg2.+19700101000000#1%
mkdir prj-cfg1/pkg2/fsdir{pkg2/}
c++ prj/pkg2/pkg2/cxx{pkg2}@prj-cfg1/pkg2/pkg2/
ld prj-cfg1/pkg2/pkg2/exe{pkg2}
@@ -97,8 +97,8 @@ deinit += -d prj
fetching dir:$~/libprj \(prerequisite of dir:$~/prj\)
synchronizing:
% new libprj.+ \\\(required by pkg1\\\)%
- % upgrade pkg1.+#1%
- % upgrade pkg2.+#1%
+ % upgrade pkg1.+19700101000000#1%
+ % upgrade pkg2.+19700101000000#1%
mkdir prj-cfg2/pkg2/fsdir{pkg2/}
c++ prj/pkg2/pkg2/cxx{pkg2}@prj-cfg2/pkg2/pkg2/
ld prj-cfg2/pkg2/pkg2/exe{pkg2}