summaryrefslogtreecommitdiff
path: root/upstream/tea/win/makefile.vc
diff options
context:
space:
mode:
Diffstat (limited to 'upstream/tea/win/makefile.vc')
-rw-r--r--upstream/tea/win/makefile.vc414
1 files changed, 414 insertions, 0 deletions
diff --git a/upstream/tea/win/makefile.vc b/upstream/tea/win/makefile.vc
new file mode 100644
index 0000000..a5e4627
--- /dev/null
+++ b/upstream/tea/win/makefile.vc
@@ -0,0 +1,414 @@
+# makefile.vc -- -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
+#-------------------------------------------------------------------------
+
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment. Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1) It is now necessary to have %MSVCDir% set in the environment. This is
+# used as a check to see if vcvars32.bat had been run prior to running
+# nmake or during the installation of Microsoft Visual C++, MSVCDir had
+# been set globally and the PATH adjusted. Either way is valid.
+#
+# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+# directory to setup the proper environment, if needed, for your current
+# setup. This is a needed bootstrap requirement and allows the swapping of
+# different environments to be easier.
+#
+# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
+# vcvars32.bat according to the instructions for it. This can also turn on
+# the 64-bit compiler, if your SDK has it.
+#
+# 3) Targets are:
+# all -- Builds everything.
+# <project> -- Builds the project (eg: nmake sample)
+# test -- Builds and runs the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
+# in an appropriate subdirectory.
+# clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4) Macros usable on the commandline:
+# INSTALLDIR=<path>
+# Sets where to install Tcl from the built binaries.
+# C:\Progra~1\Tcl is assumed when not specified.
+#
+# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+# Sets special options for the core. The default is for none.
+# Any combination of the above may be used (comma separated).
+# 'none' will over-ride everything to nothing.
+#
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
+# msvcrt = Effects the static option only to switch it from
+# using libcmt(d) as the C runtime [by default] to
+# msvcrt(d). This is useful for static embedding
+# support.
+# staticpkg = Effects the static option only to switch
+# tclshXX.exe to have the dde and reg extension linked
+# inside it.
+# threads = Turns on full multithreading support.
+# thrdalloc = Use the thread allocator (shared global free pool).
+# symbols = Adds symbols for step debugging.
+# profile = Adds profiling hooks. Map file is assumed.
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+#
+# STATS=memdbg,compdbg,none
+# Sets optional memory and bytecode compiler debugging code added
+# to the core. The default is for none. Any combination of the
+# above may be used (comma separated). 'none' will over-ride
+# everything to nothing.
+#
+# memdbg = Enables the debugging memory allocator.
+# compdbg = Enables byte compilation logging.
+#
+# MACHINE=(IX86|IA64|ALPHA)
+# Set the machine type used for the compiler, linker, and
+# resource compiler. This hook is needed to tell the tools
+# when alternate platforms are requested. IX86 is the default
+# when not specified.
+#
+# TMP_DIR=<path>
+# OUT_DIR=<path>
+# Hooks to allow the intermediate and output directories to be
+# changed. $(OUT_DIR) is assumed to be
+# $(BINROOT)\(Release|Debug) based on if symbols are requested.
+# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+# TESTPAT=<file>
+# Reads the tests requested to be run from this file.
+#
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+#
+# 5) Examples:
+#
+# Basic syntax of calling nmake looks like this:
+# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# Standard (no frills)
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>nmake -f makefile.vc all
+# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+# Building for Win64
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+# Targeting Windows pre64 RETAIL
+# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = sqlite3
+!include "rules.vc"
+
+# nmakehelp -V <file> <tag> will search the file for tag, skips until a
+# number and returns all character until a character not in [0-9.ab]
+# is read.
+
+!if [echo REM = This file is generated from Makefile.vc > versions.vc]
+!endif
+# get project version from row "AC_INIT([sqlite], [3.7.14])"
+!if [echo DOTVERSION = \>> versions.vc] \
+ && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
+!endif
+!include "versions.vc"
+
+VERSION = $(DOTVERSION:.=)
+STUBPREFIX = $(PROJECT)stub
+
+DLLOBJS = \
+ $(TMP_DIR)\tclsqlite3.obj
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT = .
+ROOT = ..
+
+PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR = $(ROOT)\generic
+WINDIR = $(ROOT)\win
+LIBDIR = $(ROOT)\library
+DOCDIR = $(ROOT)\doc
+TOOLSDIR = $(ROOT)\tools
+COMPATDIR = $(ROOT)\compat
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug = -O2 -Op -Gs
+!else
+cdebug =
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug = -Z7 -Od -GZ
+!else
+cdebug = -Z7 -WX -Od -GZ
+!endif
+
+### Declarations common to all compiler options
+cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
+
+!if $(MSVCRT)
+!if $(DEBUG)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
+ -I"$(ROOT)\.."
+BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \
+ -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
+ -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
+CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
+TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \
+ -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
+ $(OPTDEFINES)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug = -debug:full -debugtype:cv
+!else
+ldebug = -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags = -nologo -machine:$(MACHINE) $(ldebug)
+
+!if $(PROFILE)
+lflags = $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags = $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags = $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags = $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+baselibs = $(TCLSTUBLIB)
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!ENDIF
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all: setup $(PROJECT)
+$(PROJECT): setup $(PRJLIB)
+install: install-binaries install-libraries install-docs
+
+# Tests need to ensure we load the right dll file we
+# have to handle the output differently on Win9x.
+#
+!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
+test: setup $(PROJECT)
+ set TCL_LIBRARY=$(ROOT)/library
+ $(TCLSH) <<
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+!else
+test: setup $(PROJECT)
+ echo Please wait while the test results are collected
+ set TCL_LIBRARY=$(ROOT)/library
+ $(TCLSH) << >tests.log
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+ type tests.log | more
+!endif
+
+setup:
+ @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+ @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+$(PRJLIB): $(DLLOBJS)
+ $(link32) $(dlllflags) -out:$@ $(baselibs) @<<
+$**
+<<
+ -@del $*.exp
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+ $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+ $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+ $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+!if $(DEBUG)
+ -d DEBUG \
+!endif
+!if $(TCL_THREADS)
+ -d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+ -d STATIC_BUILD \
+!endif
+ $<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+ @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+ @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+ @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+
+install-libraries:
+ @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+ @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+ @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+ @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
+package ifneeded $(PROJECT) $(DOTVERSION) \
+ [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
+<<
+
+install-docs:
+ @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+ @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+ @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+ @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+
+realclean: clean
+ @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+ @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+ @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj