From 7cbe303fd6682af1ca33a7ed21993a0478c2ccbc Mon Sep 17 00:00:00 2001
From: Boris Kolpackov <boris@codesynthesis.com>
Date: Wed, 25 Mar 2020 11:36:41 +0200
Subject: Various bootstrap script fixes

---
 bootstrap | 43 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 34 insertions(+), 9 deletions(-)

(limited to 'bootstrap')

diff --git a/bootstrap b/bootstrap
index dbc1d7f..7a1291b 100755
--- a/bootstrap
+++ b/bootstrap
@@ -13,15 +13,16 @@
 # This script assumes the following steps have been performed:
 #
 # 1. The latest staged toolchain has been temporarily installed somewhere
-#    other than /usr/local (e.g., /tmp/build2) and is in PATH.
+#    other than /usr/local (e.g., /tmp/build2) and is in PATH. Hint: use
+#    --local to speed things up seeing that this is a throw-away installation.
 #
 # 2. The CLI and ODB compilers have been built and are either installed (if
 #    you don't plan to contribute to them) or symlinked in /usr/local/bin/.
 #    For the latter case they would typically go to ~/work/{cli,odb/}, for
-#    example (showing for CLI; note: remove sanitizers for ODB):
+#    example, for CLI:
 #
-#    NOTE: clone using the git.codesynthesis.com:/var/scm/cli/cli.git SSH
-#          URL for rw access.
+#    NOTE: clone using the git.codesynthesis.com:/var/scm/... SSH URL for rw
+#          access.
 #
 #    mkdir -p ~/work/cli
 #    cd ~/work/cli
@@ -31,20 +32,36 @@
 #      config.cxx=g++-N                             \
 #      config.cc.coptions="-Wall -Wextra -Werror -g3 -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer"
 #    b
-#    sudo ln -s "$(pwd)/cli/cli /usr/local/bin/cli"
+#    sudo ln -s "$(pwd)/cli/cli" /usr/local/bin/cli
 #    which cli
 #    cli --version
 #
+#    For ODB (no sanitizer use is currently possible due to the way GCC is
+#    built):
+#
+#    mkdir -p ~/work/odb
+#    cd ~/work/odb
+#    git clone --recursive https://git.codesynthesis.com/odb/odb.git
+#    cd odb
+#    bdep init -C ../builds/gccN-asan @gccN-asan cc \
+#      config.cxx=g++-N                             \
+#      config.cc.coptions="-Wall -Wextra -Werror -g3"
+#    b
+#    sudo ln -s "$(pwd)/odb/odb"    /usr/local/bin/odb
+#    sudo ln -s "$(pwd)/odb/odb.so" /usr/local/bin/odb.so
+#    which odb
+#    odb --version
+#
 # Once this is done, you should be able to:
 #
+# NOTE: clone using the git.build2.org:/var/scm/... SSH URL and pass the
+#       --ssh bootstrap option for rw access.
+#
 # mkdir -p ~/work/build2
 # cd ~/work/build2
 # git clone --recursive https://git.build2.org/etc.git
 # PATH="/tmp/build2/bin:$PATH" etc/bootstrap
 #
-# NOTE: use the git.build2.org:/var/scm/etc.git SSH URL and pass the
-#       --ssh bootstrap option for rw access.
-#
 # After a successful bootstrap you can remove the staged toolchain.
 #
 # Also a few notes and tips on the development process: Because the toolchain
@@ -215,10 +232,17 @@ run mkdir -p builds
 
 # Build system configuration.
 #
-run bpkg create -d "builds/$cfg-asan-bs" cc cli \
+# Notes:
+#
+#   1. Using ?cli since this should be buildable by b-boot.
+#
+#   2. Only building shared libraries for speed of development.
+#
+run bpkg create -d "builds/$cfg-asan-bs" cc ?cli \
   config.cxx="$cxx" \
   config.cc.coptions="-Wall -Wextra -Werror -g3 -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer" \
   config.cc.loptions="-fuse-ld=gold -Wl,--threads,--thread-count,4" \
+  config.bin.lib=shared \
   config.install.root=/tmp/install config.dist.root=/tmp/dist
 
 run bdep init -d libbutl -A "builds/$cfg-asan-bs" "@$cfg-asan-bs" --no-default
@@ -233,6 +257,7 @@ run bpkg create -d "builds/$cfg-asan-pm" cc cli \
   config.cxx="$cxx" \
   config.cc.coptions="-Wall -Wextra -Werror -g3 -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer" \
   config.cc.loptions="-fuse-ld=gold -Wl,--threads,--thread-count,4" \
+  config.bin.lib=shared \
   config.install.root=/tmp/install config.dist.root=/tmp/dist
 
 run bdep init -d libbutl -A "builds/$cfg-asan-pm" "@$cfg-asan-pm" --default
-- 
cgit v1.1