aboutsummaryrefslogtreecommitdiff
path: root/libbuild2
diff options
context:
space:
mode:
Diffstat (limited to 'libbuild2')
-rw-r--r--libbuild2/bin/init.cxx27
-rw-r--r--libbuild2/c/init.cxx5
-rw-r--r--libbuild2/cc/init.cxx5
-rw-r--r--libbuild2/cc/module.cxx5
-rw-r--r--libbuild2/config/init.cxx7
-rw-r--r--libbuild2/config/utility.cxx4
-rw-r--r--libbuild2/config/utility.hxx4
-rw-r--r--libbuild2/cxx/init.cxx9
-rw-r--r--libbuild2/dist/init.cxx52
-rw-r--r--libbuild2/file.cxx4
-rw-r--r--libbuild2/in/init.cxx5
-rw-r--r--libbuild2/install/init.cxx27
-rw-r--r--libbuild2/install/utility.hxx2
-rw-r--r--libbuild2/module.cxx4
-rw-r--r--libbuild2/test/init.cxx10
15 files changed, 109 insertions, 61 deletions
diff --git a/libbuild2/bin/init.cxx b/libbuild2/bin/init.cxx
index 265521e..4b6090a 100644
--- a/libbuild2/bin/init.cxx
+++ b/libbuild2/bin/init.cxx
@@ -54,11 +54,14 @@ namespace build2
// Enter variables.
//
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
+
// Target is a string and not target_triplet because it can be
// specified by the user.
//
- auto& vp (rs.var_pool ());
-
vp.insert<string> ("config.bin.target");
vp.insert<string> ("config.bin.pattern");
@@ -628,7 +631,10 @@ namespace build2
//
if (first)
{
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
vp.insert<path> ("config.bin.ar");
vp.insert<path> ("config.bin.ranlib");
@@ -802,7 +808,10 @@ namespace build2
//
if (first)
{
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
vp.insert<path> ("config.bin.ld");
}
@@ -960,7 +969,10 @@ namespace build2
//
if (first)
{
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
vp.insert<path> ("config.bin.rc");
}
@@ -1059,7 +1071,10 @@ namespace build2
//
if (first)
{
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
vp.insert<path> ("config.bin.nm");
}
diff --git a/libbuild2/c/init.cxx b/libbuild2/c/init.cxx
index 4c051b0..0b6c85b 100644
--- a/libbuild2/c/init.cxx
+++ b/libbuild2/c/init.cxx
@@ -154,7 +154,10 @@ namespace build2
// Enter all the variables and initialize the module data.
//
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
cc::config_data d {
cc::lang::c,
diff --git a/libbuild2/cc/init.cxx b/libbuild2/cc/init.cxx
index b2f35aa..33a1133 100644
--- a/libbuild2/cc/init.cxx
+++ b/libbuild2/cc/init.cxx
@@ -86,7 +86,10 @@ namespace build2
// Enter variables.
//
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
auto v_t (variable_visibility::target);
diff --git a/libbuild2/cc/module.cxx b/libbuild2/cc/module.cxx
index 27f9d9e..6583001 100644
--- a/libbuild2/cc/module.cxx
+++ b/libbuild2/cc/module.cxx
@@ -41,7 +41,10 @@ namespace build2
config::save_module (rs, x, 250);
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
// Must already exist.
//
diff --git a/libbuild2/config/init.cxx b/libbuild2/config/init.cxx
index 72ded05..7035ce5 100644
--- a/libbuild2/config/init.cxx
+++ b/libbuild2/config/init.cxx
@@ -100,7 +100,10 @@ namespace build2
// reserved to not be valid module names (`build`). We also currently
// treat `import` as special.
//
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
// NOTE: all config.** variables are by default made (via a pattern) to
// be overridable with global visibility. So we must override this if a
@@ -234,7 +237,7 @@ namespace build2
? &extra.module_as<module> ()
: nullptr);
- auto& vp (rs.var_pool ());
+ auto& vp (rs.var_pool (true /* public */));
// Note: config.* is pattern-typed to global visibility.
//
diff --git a/libbuild2/config/utility.cxx b/libbuild2/config/utility.cxx
index 314de84..6574367 100644
--- a/libbuild2/config/utility.cxx
+++ b/libbuild2/config/utility.cxx
@@ -130,7 +130,7 @@ namespace build2
// Pattern-typed as bool.
//
const variable& var (
- rs.var_pool ().insert ("config." + n + ".configured"));
+ rs.var_pool (true).insert ("config." + n + ".configured"));
save_variable (rs, var);
@@ -144,7 +144,7 @@ namespace build2
// Pattern-typed as bool.
//
const variable& var (
- rs.var_pool ().insert ("config." + n + ".configured"));
+ rs.var_pool (true).insert ("config." + n + ".configured"));
save_variable (rs, var);
diff --git a/libbuild2/config/utility.hxx b/libbuild2/config/utility.hxx
index 98d7ec0..1e2ff53 100644
--- a/libbuild2/config/utility.hxx
+++ b/libbuild2/config/utility.hxx
@@ -435,7 +435,7 @@ namespace build2
const V* cv (
cast_null<V> (
lookup_config (rs,
- rs.var_pool ().insert<V> ("config." + var),
+ rs.var_pool (true).insert<V> ("config." + var),
std::forward<T> (default_value)))); // VC14
value& v (bs.assign<V> (move (var)));
@@ -453,7 +453,7 @@ namespace build2
const V* cv (
cast_null<V> (
lookup_config (rs,
- rs.var_pool ().insert<V> ("config." + var),
+ rs.var_pool (true).insert<V> ("config." + var),
std::forward<T> (default_value)))); // VC14
value& v (bs.append<V> (move (var)));
diff --git a/libbuild2/cxx/init.cxx b/libbuild2/cxx/init.cxx
index 3a934db..5396056 100644
--- a/libbuild2/cxx/init.cxx
+++ b/libbuild2/cxx/init.cxx
@@ -93,7 +93,7 @@ namespace build2
// Feature flags.
//
- auto& vp (rs.var_pool ());
+ auto& vp (rs.var_pool (true /* public */)); // All qualified.
// Similar to config.cxx.std, config.cxx.features.* overrides
// cxx.features.*.
@@ -469,7 +469,10 @@ namespace build2
// Enter all the variables and initialize the module data.
//
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
cc::config_data d {
cc::lang::cxx,
@@ -811,7 +814,7 @@ namespace build2
auto& cm (
load_module<config_module> (rs, rs, "cxx.config", loc, extra.hints));
- auto& vp (rs.var_pool ());
+ auto& vp (rs.var_pool (true /* public */)); // All qualified.
bool modules (cast<bool> (rs["cxx.features.modules"]));
diff --git a/libbuild2/dist/init.cxx b/libbuild2/dist/init.cxx
index 5e371bf..26ff86d 100644
--- a/libbuild2/dist/init.cxx
+++ b/libbuild2/dist/init.cxx
@@ -33,7 +33,34 @@ namespace build2
// Enter module variables. Do it during boot in case they get assigned
// in bootstrap.build (which is customary for, e.g., dist.package).
//
- auto& vp (rs.var_pool ());
+
+ // The dist flag or path. Normally it is a flag (true or false) but can
+ // also be used to remap the distribution location.
+ //
+ // In the latter case it specifies the "imaginary" source location which
+ // is used to derive the corresponding distribution local. This location
+ // can be specified as either a directory path (to remap with the same
+ // file name) or a file path (to remap with a different name). And the
+ // way we distinguish between the two is via the presence/absence of the
+ // trailing directory separator. If the path is relative, then it's
+ // treated relative to the target directory. Note that to make things
+ // less error prone, simple paths without any directory separators are
+ // not allowed (use ./<name> instead).
+ //
+ // Note that if multiple targets end up with the same source location,
+ // the behavior is undefined and no diagnostics is issued.
+ //
+ // Note also that such remapping has no effect in the bootstrap
+ // distribution mode.
+ //
+ // Note: project-private.
+ //
+ rs.var_pool ().insert<path> ("dist", variable_visibility::target);
+
+ // The rest of the variables we enter are qualified so go straight for
+ // the public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
// config.dist.archives is a list of archive extensions (e.g., zip,
// tar.gz) that can be optionally prefixed with a directory. If it is
@@ -72,27 +99,6 @@ namespace build2
vp.insert<paths> ("dist.archives");
vp.insert<paths> ("dist.checksums");
- // The dist flag or path. Normally it is a flag (true or false) but can
- // also be used to remap the distribution location.
- //
- // In the latter case it specifies the "imaginary" source location which
- // is used to derive the corresponding distribution local. This location
- // can be specified as either a directory path (to remap with the same
- // file name) or a file path (to remap with a different name). And the
- // way we distinguish between the two is via the presence/absence of the
- // trailing directory separator. If the path is relative, then it's
- // treated relative to the target directory. Note that to make things
- // less error prone, simple paths without any directory separators are
- // not allowed (use ./<name> instead).
- //
- // Note that if multiple targets end up with the same source location,
- // the behavior is undefined and no diagnostics is issued.
- //
- // Note also that such remapping has no effect in the bootstrap
- // distribution mode.
- //
- vp.insert<path> ("dist", variable_visibility::target);
-
// Project's package name. Note: if set, must be in bootstrap.build.
//
auto& v_d_p (vp.insert<string> ("dist.package"));
@@ -202,7 +208,7 @@ namespace build2
l5 ([&]{trace << "for " << rs;});
- auto& vp (rs.var_pool ());
+ auto& vp (rs.var_pool (true /* public */)); // All qualified.
// Register our wildcard rule. Do it explicitly for the alias to prevent
// something like insert<target>(dist_id, test_id) taking precedence.
diff --git a/libbuild2/file.cxx b/libbuild2/file.cxx
index cb57f70..6cd4402 100644
--- a/libbuild2/file.cxx
+++ b/libbuild2/file.cxx
@@ -2138,7 +2138,9 @@ namespace build2
// over anything that we may discover. In particular, we will prefer it
// over any bundled subprojects.
//
- auto& vp (iroot.var_pool ());
+ // Note: go straight for the public variable pool.
+ //
+ auto& vp (iroot.var_pool (true /* public */));
using config::lookup_config;
diff --git a/libbuild2/in/init.cxx b/libbuild2/in/init.cxx
index 8bd5909..2fb73e1 100644
--- a/libbuild2/in/init.cxx
+++ b/libbuild2/in/init.cxx
@@ -34,7 +34,10 @@ namespace build2
// Enter variables.
//
{
- auto& vp (rs.var_pool ());
+ // All the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
// Alternative variable substitution symbol with '$' being the
// default.
diff --git a/libbuild2/install/init.cxx b/libbuild2/install/init.cxx
index 35c2d13..1a6ee0f 100644
--- a/libbuild2/install/init.cxx
+++ b/libbuild2/install/init.cxx
@@ -166,6 +166,8 @@ namespace build2
bool global (*name == '\0');
+ auto& vp (rs.var_pool (true /* default */)); // All qualified.
+
if (spec)
{
vn = "config.install";
@@ -175,7 +177,7 @@ namespace build2
vn += name;
}
vn += var;
- const variable& vr (rs.var_pool ().insert<CT> (move (vn)));
+ const variable& vr (vp.insert<CT> (move (vn)));
using config::lookup_config;
@@ -192,7 +194,7 @@ namespace build2
vn = "install.";
vn += name;
vn += var;
- const variable& vr (rs.var_pool ().insert<T> (move (vn)));
+ const variable& vr (vp.insert<T> (move (vn)));
value& v (rs.assign (vr));
@@ -236,7 +238,7 @@ namespace build2
// This one doesn't have config.* value (only set in a buildfile).
//
if (!global)
- rs.var_pool ().insert<bool> (string ("install.") + n + ".subdirs");
+ rs.var_pool (true).insert<bool> (string ("install.") + n + ".subdirs");
}
void
@@ -252,8 +254,6 @@ namespace build2
// Enter module variables (note that init() below enters some more).
//
- auto& vp (rs.var_pool ());
-
// The install variable is a path, not dir_path, since it can be used
// to both specify the target directory (to install with the same file
// name) or target file (to install with a different name). And the
@@ -263,7 +263,8 @@ namespace build2
// Plus it can have the special true/false values when acting as a
// operation variable.
//
- auto& ovar (vp.insert<path> ("install", variable_visibility::target));
+ auto& ovar (rs.var_pool ().insert<path> ("install",
+ variable_visibility::target));
// Register the install function family if this is the first instance of
// the install modules.
@@ -327,15 +328,17 @@ namespace build2
// Enter module variables.
//
- auto& vp (rs.var_pool ());
+ rs.var_pool ().insert<bool> ("for_install", variable_visibility::prereq);
+
+ // The rest of the variables we enter are qualified so go straight
+ // for the public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
// Note that the set_dir() calls below enter some more.
//
- {
- vp.insert<bool> ("for_install", variable_visibility::prereq);
- vp.insert<string> ("install.mode");
- vp.insert<bool> ("install.subdirs");
- }
+ vp.insert<string> ("install.mode");
+ vp.insert<bool> ("install.subdirs");
// Environment.
//
diff --git a/libbuild2/install/utility.hxx b/libbuild2/install/utility.hxx
index 52b9a54..3e2dcad 100644
--- a/libbuild2/install/utility.hxx
+++ b/libbuild2/install/utility.hxx
@@ -43,7 +43,7 @@ namespace build2
{
auto r (
s.target_vars[tt]["*"].insert (
- *s.var_pool ().find ("install.mode")));
+ *s.ctx.var_pool.find ("install.mode")));
if (r.second) // Already set by the user?
r.first = move (m);
diff --git a/libbuild2/module.cxx b/libbuild2/module.cxx
index b7b9bbb..f200a63 100644
--- a/libbuild2/module.cxx
+++ b/libbuild2/module.cxx
@@ -674,7 +674,7 @@ namespace build2
i->boot_init = e.init;
}
- rs.assign (rs.var_pool ().insert (mod + ".booted")) = (mf != nullptr);
+ rs.assign (rs.var_pool (true).insert (mod + ".booted")) = (mf != nullptr);
}
void
@@ -743,7 +743,7 @@ namespace build2
// buildfile-visible (where we use the term "load a module"; see the note
// on terminology above)
//
- auto& vp (rs.var_pool ());
+ auto& vp (rs.var_pool (true));
value& lv (bs.assign (vp.insert (mod + ".loaded")));
value& cv (bs.assign (vp.insert (mod + ".configured")));
diff --git a/libbuild2/test/init.cxx b/libbuild2/test/init.cxx
index f62ddcc..b7cf25f 100644
--- a/libbuild2/test/init.cxx
+++ b/libbuild2/test/init.cxx
@@ -33,7 +33,11 @@ namespace build2
// Enter module variables. Do it during boot in case they get assigned
// in bootstrap.build.
//
- auto& vp (rs.var_pool ());
+ // Most of the variables we enter are qualified so go straight for the
+ // public variable pool.
+ //
+ auto& vp (rs.var_pool (true /* public */));
+ auto& pvp (rs.var_pool ()); // For `test` and `for_test`.
common_data d {
@@ -64,7 +68,7 @@ namespace build2
// The test variable is a name which can be a path (with the
// true/false special values) or a target name.
//
- vp.insert<name> ("test", variable_visibility::target),
+ pvp.insert<name> ("test", variable_visibility::target),
vp.insert<strings> ("test.options"),
vp.insert<strings> ("test.arguments"),
@@ -106,7 +110,7 @@ namespace build2
// This one is used by other modules/rules.
//
- vp.insert<bool> ("for_test", variable_visibility::prereq);
+ pvp.insert<bool> ("for_test", variable_visibility::prereq);
// These are only used in testscript.
//
generated by cgit v1.1 at 2024-11-08 19:27:49 +0000