diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/packaging.cli | 160 |
1 files changed, 154 insertions, 6 deletions
diff --git a/doc/packaging.cli b/doc/packaging.cli index 504948c..18bc0ac 100644 --- a/doc/packaging.cli +++ b/doc/packaging.cli @@ -1057,6 +1057,19 @@ $ bdep new --package \ libfoo \ +When packaging an executable, things are usually quite a bit simpler: there is +no version header, symbol exporting, and the layout is normally combined +(since there are no public headers). Typically the only potentially tricky +decision you will need to make is whether to use \i{prefix} or \i{source +subdirectory}. Most likely it will be \i{prefix} since most executable +projects will use the \c{\"\"} style inclusion for own headers. For example: + +\ +$ bdep new --package \ + --lang c++ \ + --type exe,no-subdir,prefix=foo \ + foo +\ \h2#core-package-review|Review and test auto-generated \c{buildfile} templates| @@ -1396,6 +1409,15 @@ $ cd foo/ # Change to the package repository root. $ bdep init -C ../foo-gcc @gcc cc config.cxx=g++ \ +\N|If you are initializing subsequent packages in the already created +configuration, then the command line will be just: + +\ +$ bdep init @gcc +\ + +| + Let's build and test the \c{bdep-new}-generated package to make sure everything is in order: @@ -1456,6 +1478,22 @@ framework (whether bundled or not), see How do I handle tests that have extra dependencies?} for the recommended way to deal with that. +\N|One special type of dependency which is easy to overlook is between +packages in the same package repository. For example, if we were packaging +both \c{libfoo} as well as the \c{foo} executable that depends on it, then the +\c{foo} package has a dependency on \c{libfoo} and it must be specified. In +this case we don't need to add anything to \c{repositories.manifest} and in +the \c{depends} entry (see below) in \c{foo}'s \c{manifest} we will normally +use the special \c{==\ $} version constraint, meaning \c{libfoo} should have +the same version as \c{foo} (see the \l{bpkg#manifest-package-depends +\c{depends} package \c{manifest} value} for details). For example: + +\ +depends: libfoo == $ +\ + +| + If you have concluded that the upstream project doesn't have any dependencies, then you can remove \c{repositories.manifest} from the package repository root (unless you have already done so), commit this change, and skip the rest of @@ -1840,6 +1878,10 @@ libfoo/ └── ... \ +\N|If instead of a library you are packaging an executable, you can skip +directly to \l{#core-adjust-build-src-source-exe Adjust source \c{buildfile}: +executables}.| + \h2#core-adjust-build-src-header|Adjust header \c{buildfile}| @@ -2584,15 +2626,121 @@ build. See \l{b#intro-lib Library Exportation and Versioning} for background and details. +\h2#core-adjust-build-src-source-exe|Adjust source \c{buildfile}: executables| + +If instead of a library you are packaging an executable, then, as mentioned +earlier, it will most likely be a combined layout with a single \c{buildfile}. +This \c{buildfile} will also be much simpler compared to the library's. For +example, give the following \c{bdep-new} command: + +\ +$ bdep new --package --lang c++ --type exe,no-subdir,prefix=foo foo +\ + +The resulting source \c{buildfile} will look like this: + +\ +libs = +#import libs += libhello%lib{hello} + +exe{foo}: {hxx ixx txx cxx}{**} $libs testscript + +out_pfx = [dir_path] $out_root/foo/ +src_pfx = [dir_path] $src_root/foo/ + +cxx.poptions =+ \"-I$out_pfx\" \"-I$src_pfx\" +\ + +If the executable doesn't have any inline/template/header files, then you can +remove the \c{ixx}/\c{txx}/\c{hxx} target types, respectively (which would be +parallel to the change made in \c{root.build}; see \l{#core-adjust-build-wide +Adjust project-wide build system files in \c{build/}}). For example: + +\ +exe{foo}: {hxx cxx}{**} $libs testscript +\ + +If the source code includes its own headers with the \c{\"\"} style inclusion +(or doesn't have any headers), then we can also get rid of \c{out_pfx} and +\c{src_pfx}. For example: + +\ +libs = +#import libs += libhello%lib{hello} + +exe{foo}: {hxx ixx txx cxx}{**} $libs testscript +\ + +\N|Unfortunately it's not uncommon for projects that provide both a library +and an executable, for the executable source code to include public and/or +private library headers with the relative \c{\"\"} style inclusion. For +example: + +\ +#include \"../../libfoo/include/foo/util.hpp\" +#include \"../../libfoo/src/impl.hpp\" +\ + +This approach won't work in \c{build2} since the two packages may end up in +different directories or the library could even be installed. There are two +techniques that can be used to work around this issue (other than patching the +upstream source code). + +For public headers we can provide, in the appropriate places within the +executable package, \"thunk headers\" with the same names as public headers +that simply include the corresponding public header from the library using the +\c{<>} style inclusion. + +For private headers we can provide, again in the appropriate places within the +executable package, our own symlinks for a subset of private headers. Note +that this will only work if the use of private headers within the executable +does not depend on any symbols that are not exported by the library (failed +that, the executable will have to always link to the static variant of the +library). + +For a real example of both of these techniques, see the +\l{https://github.com/build2-packaging/zstd/tree/v1.5.5 \c{zstd}} package +repository.| + +Dealing with dependencies in executables is similar to libraries except that +here we don't have the interface/implementation distinction; see the +\l{#core-adjust-build-src-source-dep Adjust source \c{buildfile}: +dependencies} step. For example: + +\ +import libs = libfoo%lib{foo} + +exe{foo}: {hxx ixx txx cxx}{**} $libs testscript +\ + +Likewise, dealing with build options in executables is similar to libraries +except that here we have no export options; see the +\l{#core-adjust-build-src-source-opt Adjust source \c{buildfile}: build and +export options} step. + +If the executable can plausibly be used in a build, then it's recommended to +add \c{build2} metadata as describe in +\l{https://github.com/build2/HOWTO/blob/master/entries/convey-additional-information-with-exe-lib.md +How do I convey additional information (metadata) with executables and C/C++ +libraries?} See also \l{#howto-patch-upstream-source-preproc Modifying +upstream source code with C/C++ preprocessor} on how to do it without +physically modifying upstream source code. \N{See the +\l{https://github.com/build2-packaging/zstd/tree/v1.5.5 \c{zstd}} package +repository for a real example of doing this.} + +\N|We will discuss the \c{testscript} prerequisite in @@ ref.| + + \h2#core-adjust-build-src-source-ext|Adjust source \c{buildfile}: extra requirements| The changes discussed so far should be sufficient to handle a typical library -that is written in C and/or C++ and is able to handle platform differences -with the preprocessor and compile/link options. However, sooner or later you -will run into a more complex library that may use additional languages, -require more elaborate platform detection, or use additional functionality, -such as support for source code generators. The below list provides pointers -to resources that cover the more commonly encountered additional requirements. +or executable that is written in C and/or C++ and is able to handle platform +differences with the preprocessor and compile/link options. However, sooner or +later you will run into a more complex library that may use additional +languages, require more elaborate platform detection, or use additional +functionality, such as support for source code generators. The below list +provides pointers to resources that cover the more commonly encountered +additional requirements. \ul| |