From a791b1ce0fa2bc9859474fb6f7a9c0ff8cbd1d4a Mon Sep 17 00:00:00 2001
From: Karen Arutyunov <karen@codesynthesis.com>
Date: Wed, 22 Feb 2017 00:58:53 +0300
Subject: Port test.sh to testscript

---
 tests/test.sh | 2003 ---------------------------------------------------------
 1 file changed, 2003 deletions(-)
 delete mode 100755 tests/test.sh

(limited to 'tests/test.sh')

diff --git a/tests/test.sh b/tests/test.sh
deleted file mode 100755
index 6858ea6..0000000
--- a/tests/test.sh
+++ /dev/null
@@ -1,2003 +0,0 @@
-#! /usr/bin/env bash
-
-# Usage: test.sh [test-options] [bpkg-common-options]
-#
-# Test options are:
-#
-# -v
-#    Run verbose. By default, this script runs bpkg quiet and suppresses
-#    error messages in the fail tests. Note that when this options is
-#    specified, bpkg is called with default verbosity level. If you want
-#    more bpkg diagnostics, add the --verbose N option.
-#
-# --remote
-#    Test using the remote repositories. Normally, you would first run the
-#    local test in order to create the repositories, then publish them (see
-#    pkg/publish.sh), and finally run the remote test.
-#
-# -c <compiler>
-#    Use the compiler specified to configure cxx module.
-#
-# --valgrind
-#    Run under valgrind (takes forever).
-#
-# Some common bpkg use-cases worth testing:
-#
-# --fetch wget
-# --fetch curl
-# --fetch fetch --fetch-option --no-verify-peer
-#
-# --tar bsdtar
-#
-# --sha256 shasum
-# --sha256 sha256-freebsd
-#
-
-trap 'exit 1' ERR
-
-tmp_file=`mktemp`
-
-# Remove temporary file on exit. Cover the case when exit due to an error.
-#
-trap 'rm -f $tmp_file' EXIT
-
-function error ()
-{
-  echo "$*" 1>&2
-  exit 1
-}
-
-bpkg="../bpkg/bpkg"
-cfg=/tmp/conf
-
-if [ "${MSYSTEM:0:5}" = "MINGW" -o "${MSYSTEM:0:4}" = "MSYS" ]; then
-  msys=y
-fi
-
-verbose=n
-remote=n
-options=
-cxx_options=
-
-while [ $# -gt 0 ]; do
-  case $1 in
-    -v)
-      verbose=y
-      shift
-      ;;
-    --remote)
-      remote=y
-      shift
-      ;;
-    --valgrind)
-      bpkg="valgrind -q $bpkg"
-      shift
-      ;;
-    -c)
-      shift
-      cxx_options="config.cxx=$1"
-      shift
-      ;;
-    *)
-      # If this is the --verbose bpkg option, switch to the verbose
-      # mode as well.
-      #
-      if [ "$1" == "--verbose" ]; then
-        verbose=y
-      fi
-
-      options="$options $1"
-      shift
-      ;;
-  esac
-done
-
-if [ "$verbose" != "y" ]; then
-  options="$options -q"
-fi
-
-bpkg="$bpkg $options"
-
-# Repository location and name prefixes. Note that the local path is carefully
-# crafted so that we end up with the same repository names in both cases. This
-# is necessary for the authentication tests to work in both cases.
-#
-if [ "$remote" = "y" ]; then
-  rep=https://build2.org/bpkg/1
-  repn=build2.org/
-else
-  rep=pkg/1/build2.org
-  repn=build2.org/
-fi
-
-#
-#
-function test ()
-{
-  local cmd=$1; shift
-  local ops=
-
-  if [ "$cmd" != "rep-create" -a \
-       "$cmd" != "rep-info" -a   \
-       "$cmd" != "pkg-verify" ]; then
-    ops="-d $cfg"
-  fi
-
-  if [ "$cmd" = "rep-fetch" -o \
-       "$cmd" = "rep-info" ]; then
-    ops="$ops --auth all"
-  fi
-
-  if [ -t 0 ]; then
-    $bpkg $cmd $ops $*
-  else
-    $bpkg $cmd $ops $* >$tmp_file
-    diff --strip-trailing-cr -u - $tmp_file
-  fi
-
-  if [ $? -ne 0 ]; then
-    error "failed: $bpkg $cmd $ops $*"
-  fi
-}
-
-function fail ()
-{
-  local cmd=$1; shift
-  local ops=
-
-  if [ "$cmd" != "rep-create" -a \
-       "$cmd" != "rep-info" -a   \
-       "$cmd" != "pkg-verify" ]; then
-    ops="-d $cfg"
-  fi
-
-  if [ "$cmd" = "rep-fetch" -o \
-       "$cmd" = "rep-info" ]; then
-    ops="$ops --auth all"
-  fi
-
-  if [ "$verbose" = "y" ]; then
-    $bpkg $cmd $ops $*
-  else
-    $bpkg $cmd $ops $* 2>/dev/null
-  fi
-
-  if [ $? -eq 0 ]; then
-    error "succeeded: $bpkg $cmd $ops $*"
-  fi
-
-  return 0
-}
-
-# Verify package status.
-#
-function stat ()
-{
-  local s=`$bpkg pkg-status -d $cfg $1`
-
-  if [ "$s" != "$2" ]; then
-    error "status $1: '$s', expected: '$2'"
-  fi
-}
-
-# Verify path is gone (no longer exists)
-#
-function gone ()
-{
-  if [ -e "$1" ]; then
-    error "path $1 still exists"
-  fi
-}
-
-# Repository certificate fingerprint.
-#
-function rep_cert_fp ()
-{
-  cat $1/repositories | \
-  sed -n '/^-----BEGIN CERTIFICATE-----$/,/^-----END CERTIFICATE-----$/p' | \
-  openssl x509 -sha256 -noout -fingerprint | \
-  sed -n 's/^SHA256 Fingerprint=\(.*\)$/\1/p'
-}
-
-# Edit file with sed.
-#
-function edit ()
-{
-  local path=$1; shift
-  sed "$@" $path > $path.bak
-  mv $path.bak $path
-}
-
-# Repository absolute location from a relative path.
-#
-function location ()
-{
-  if [ "$remote" = "y" ]; then
-    echo "$rep/$1"
-  elif [ "$msys" = "y" ]; then
-    # Convert Windows path like c:/abc/xyz to the c:\abc\xyz canonical form.
-    #
-    echo "`pwd -W`/$rep/$1" | sed 's%/%\\%g'
-  else
-    echo "`pwd`/$rep/$1"
-  fi
-}
-
-##
-## Low-level commands.
-##
-
-##
-## pkg-verify
-##
-fail pkg-verify                 # archive expected
-fail pkg-verify ./no-such-file  # archive does not exist
-fail pkg-verify pkg/1/build2.org/common/not-a-package.tar.gz
-fail pkg-verify --silent pkg/1/build2.org/common/not-a-package.tar.gz
-test pkg-verify pkg/1/build2.org/common/hello/libhello-1.0.0.tar.gz
-
-
-##
-## rep-create
-##
-fail rep-create                          # no 'repositories' file
-fail rep-create pkg/1/build2.org/satisfy # unexpected files
-
-test rep-create pkg/1/build2.org/common/hello --key key.pem
-
-test rep-create pkg/1/build2.org/common/foo/stable
-test rep-create pkg/1/build2.org/common/foo/testing
-
-test rep-create pkg/1/build2.org/common/bar/stable
-test rep-create pkg/1/build2.org/common/bar/testing
-test rep-create pkg/1/build2.org/common/bar/unstable
-
-
-##
-## rep-info
-##
-fail rep-info # repository location expected
-
-test rep-info --trust-yes $rep/common/foo/testing <<EOF
-${repn}common/foo/testing `location common/foo/testing`
-complement ${repn}common/foo/stable `location common/foo/stable`
-
-libfoo/1.1.0
-EOF
-
-test rep-info -m -r -n --trust-yes $rep/common/bar/unstable <<EOF
-${repn}common/bar/unstable `location common/bar/unstable`
-: 1
-location: ../../foo/testing
-:
-location: ../testing
-role: complement
-:
-EOF
-
-test rep-info -m -p --trust-yes $rep/common/bar/unstable <<EOF
-: 1
-sha256sum: 3034b727288efbb52b7b6e41fe147b815e7b3aa704e8cef6c2ee8d7421ab5b72
-:
-name: libbar
-version: 1.1.1
-summary: libbar
-license: MIT
-description: \\
-libbar is a very modern C++ XML parser.
-
-It has an API that we believe should have already been in Boost or even in
-the C++ standard library.
-
-\\
-changes: \\
-* Applied upstream patch for critical bug bar.
-
-* Applied upstream patch for critical bug foo.
-
-\\
-url: http://example.org
-email: pkg@example.org
-depends: libfoo >= 1.1.0
-location: libbar-1.1.1.tar.gz
-sha256sum: d09700602ff78ae405b6d4850e34660e939d27676e015a23b549884497c8bb45
-EOF
-
-hello_fp=`rep_cert_fp pkg/1/build2.org/common/hello`
-
-test rep-info -m -p --trust $hello_fp $rep/common/hello <<EOF
-: 1
-sha256sum: 8d324fa7911038778b215d28805c6546e737e0092f79f7bd167cf2e28f4ad96f
-:
-name: libhello
-version: 1.0.0
-summary: The "Hello World" example library
-license: MIT
-tags: c++, hello, world, example
-description: \\
-A simple library that implements the "Hello World" example in C++. Its primary
-goal is to show a canonical build2/bpkg project/package.
-\\
-url: http://www.example.org/libhello
-email: hello-users@example.org
-requires: c++11
-requires: build2 >= 0.4.0
-location: libhello-1.0.0.tar.gz
-sha256sum: d18d1472980399dd1fdbc776cb3eb3f7b2f62447210c8cfbcf1a8dd52a468395
-EOF
-
-##
-## cfg-create
-##
-test cfg-create --wipe cxx $cxx_options config.install.root=/tmp/install
-stat libfoo unknown
-
-test cfg-create --wipe config.install.root=/tmp/install cxx $cxx_options
-stat libfoo unknown
-
-
-##
-## rep-add
-##
-test cfg-create --wipe
-
-fail rep-add         # repository location expected
-fail rep-add stable  # invalid location
-fail rep-add http:// # invalid location
-
-# relative path
-#
-test rep-add ./1/bar/stable
-fail rep-add ./1/../1/bar/stable # duplicate
-
-# absolute path
-#
-test rep-add /tmp/1/foo/stable
-fail rep-add /tmp/1/../1/foo/stable # duplicate
-
-# remote URL
-#
-test rep-add http://pkg.example.org/1/testing
-fail rep-add https://www.example.org/1/testing # duplicate
-
-
-##
-## rep-fetch
-##
-test cfg-create --wipe
-
-fail rep-fetch # no repositories
-
-# hello repository
-#
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-test rep-fetch
-
-# bar/unstable repository
-#
-test cfg-create --wipe
-test rep-add $rep/common/bar/unstable
-test rep-fetch --trust-yes
-test rep-fetch
-
-# both
-#
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-add $rep/common/bar/unstable
-test rep-fetch --trust-yes
-test rep-fetch
-
-
-##
-## pkg-fetch
-##
-test rep-create pkg/1/build2.org/fetch/t1
-test cfg-create --wipe
-
-fail pkg-fetch -e                # archive expected
-fail pkg-fetch -e ./no-such-file # archive does not exist
-
-fail pkg-fetch                   # package name expected
-fail pkg-fetch libfoo            # package version expected
-fail pkg-fetch libfoo/1/2/3      # invalid package version
-
-fail pkg-fetch libfoo/1.0.0      # no repositories
-test rep-add $rep/fetch/t1
-fail pkg-fetch libfoo/1.0.0      # no packages
-test rep-fetch --trust-yes
-fail pkg-fetch libfoo/2+1.0.0    # not available
-test cfg-create --wipe
-test rep-add $rep/fetch/t1
-test rep-fetch --trust-yes
-test pkg-fetch libfoo/1.0.0
-stat libfoo/1.0.0 "fetched; available"
-fail pkg-fetch libfoo/1.0.0
-fail pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-test pkg-purge libfoo
-test pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-stat libfoo/1.0.0 "fetched; available"
-test pkg-unpack libfoo
-test pkg-fetch -r libfoo/1.1.0
-stat libfoo/1.1.0 "fetched; available"
-test pkg-unpack libfoo
-test pkg-fetch -r -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-stat libfoo/1.0.0 "fetched; available"
-test pkg-fetch -r libfoo/1.1.0
-stat libfoo/1.1.0 "fetched; available"
-test pkg-fetch -r -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-stat libfoo/1.0.0 "fetched; available"
-test pkg-purge libfoo
-
-# hello
-#
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-test pkg-fetch libhello/1.0.0
-test pkg-purge libhello
-
-
-##
-## pkg-unpack
-##
-test cfg-create --wipe
-fail pkg-unpack -r # replace only with existing
-fail pkg-unpack -e # package directory expected
-fail pkg-unpack    # package name expected
-
-test rep-add $rep/fetch/t1
-test rep-fetch --trust-yes
-
-# existing
-#
-fail pkg-unpack -e ./no-such-dir # package directory does not exist
-fail pkg-unpack -e ./pkg         # not a package directory
-test pkg-fetch libfoo/1.0.0
-fail pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0 # already exists
-test pkg-purge libfoo
-test pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-stat libfoo/1.1.0 "unpacked; available"
-test pkg-purge libfoo
-
-# existing & replace
-#
-test pkg-fetch libfoo/1.0.0
-fail pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-test pkg-unpack -r -e pkg/1/build2.org/fetch/libfoo-1.1.0
-stat libfoo/1.1.0 "unpacked; available"
-test pkg-purge libfoo
-test pkg-fetch libfoo/1.0.0
-test pkg-unpack libfoo
-fail pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-test pkg-unpack -r -e pkg/1/build2.org/fetch/libfoo-1.1.0
-stat libfoo/1.1.0 "unpacked; available"
-test pkg-purge libfoo
-
-# package name
-#
-fail pkg-unpack libfoo # no such package in configuration
-test pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-fail pkg-unpack libfoo # wrong package state
-test pkg-purge libfoo
-test pkg-fetch libfoo/1.0.0
-stat libfoo/1.0.0 "fetched; available"
-test pkg-unpack libfoo
-stat libfoo/1.0.0 "unpacked; available"
-test pkg-purge libfoo
-
-# hello
-#
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-test pkg-fetch libhello/1.0.0
-test pkg-unpack libhello
-test pkg-purge libhello
-
-
-##
-## pkg-purge
-##
-test cfg-create --wipe
-
-fail pkg-purge         # missing package name
-fail pkg-purge libfoo  # no such package
-
-# purge fetched
-#
-test pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-test pkg-purge libfoo
-stat libfoo unknown
-
-# --keep
-#
-test pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-test pkg-purge -k libfoo
-stat libfoo "fetched 1.0.0"
-test pkg-purge libfoo
-
-# archive and --purge
-#
-cp pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz $cfg/
-test pkg-fetch -e -p $cfg/libfoo-1.0.0.tar.gz
-test pkg-purge libfoo
-stat libfoo unknown
-gone $cfg/libfoo-1.0.0.tar.gz
-
-# no archive but --keep
-#
-test pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-fail pkg-purge --keep libfoo
-stat libfoo "unpacked 1.1.0"
-test pkg-purge libfoo
-
-# purge unpacked directory
-#
-test pkg-unpack -e pkg/1/build2.org/fetch/libfoo-1.1.0
-test pkg-purge libfoo
-stat libfoo unknown
-
-# purge unpacked archive
-#
-test pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-test pkg-purge libfoo
-stat libfoo unknown
-gone $cfg/libfoo-1.0.0
-
-# purge unpacked archive but --keep
-#
-test pkg-fetch -e pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-test pkg-purge --keep libfoo
-stat libfoo "fetched 1.0.0"
-gone $cfg/libfoo-1.0.0
-test pkg-purge libfoo
-stat libfoo unknown
-
-# directory and --purge
-#
-cp -r pkg/1/build2.org/fetch/libfoo-1.1.0 $cfg/
-test pkg-unpack -e -p $cfg/libfoo-1.1.0
-test pkg-purge libfoo
-stat libfoo unknown
-gone $cfg/libfoo-1.1.0
-
-# archive and --purge
-#
-cp pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz $cfg/
-test pkg-fetch -e -p $cfg/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-test pkg-purge libfoo
-stat libfoo unknown
-gone $cfg/libfoo-1.0.0
-gone $cfg/libfoo-1.0.0.tar.gz
-
-# broken
-#
-cp pkg/1/build2.org/fetch/libfoo-1.0.0.tar.gz $cfg/
-test pkg-fetch -e -p $cfg/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-chmod 000 $cfg/libfoo-1.0.0
-fail pkg-purge libfoo
-stat libfoo/1.0.0 broken
-fail pkg-purge libfoo        # need --force
-fail pkg-purge -f -k libfoo  # can't keep broken
-fail pkg-purge -f libfoo     # out directory still exists
-chmod 755 $cfg/libfoo-1.0.0
-rm -r $cfg/libfoo-1.0.0
-fail pkg-purge -f libfoo     # archive still exists
-rm $cfg/libfoo-1.0.0.tar.gz
-test pkg-purge -f libfoo
-stat libfoo unknown
-
-##
-## pkg-configure/pkg-disfigure
-##
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-
-fail pkg-configure                        # package name expected
-fail pkg-configure config.dist.root=/tmp  # ditto
-fail pkg-configure libhello libhello      # unexpected argument
-fail pkg-configure libhello1              # no such package
-
-fail pkg-disfigure                        # package name expected
-fail pkg-disfigure libhello1              # no such package
-
-test pkg-fetch libhello/1.0.0
-
-fail pkg-configure libhello $cxx_options  # wrong package state
-fail pkg-disfigure libhello               # wrong package state
-
-test pkg-purge libhello
-
-# src == out
-#
-test pkg-fetch libhello/1.0.0
-test pkg-unpack libhello
-test pkg-configure libhello $cxx_options
-stat libhello "configured 1.0.0; available sys:?"
-test pkg-disfigure libhello
-stat libhello "unpacked 1.0.0; available sys:?"
-test pkg-purge libhello
-stat libhello/1.0.0 "available"
-
-# src != out
-#
-test cfg-create --wipe
-test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-test pkg-configure libhello $cxx_options
-stat libhello "configured 1.0.0"
-test pkg-disfigure libhello
-stat libhello "unpacked 1.0.0"
-test pkg-purge libhello
-stat libhello unknown
-gone $cfg/libhello-1.0.0
-
-# out still exists after disfigure
-#
-test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-test pkg-configure libhello $cxx_options
-touch $cfg/libhello-1.0.0/stray
-fail pkg-disfigure libhello
-stat libhello/1.0.0 broken
-rm -r $cfg/libhello-1.0.0
-test pkg-purge -f libhello
-stat libhello unknown
-
-# disfigure failed
-#
-test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-test pkg-configure libhello $cxx_options
-chmod 555 $cfg/libhello-1.0.0
-fail pkg-disfigure libhello
-stat libhello/1.0.0 broken
-chmod 755 $cfg/libhello-1.0.0
-rm -r $cfg/libhello-1.0.0
-test pkg-purge -f libhello
-stat libhello unknown
-
-# While it's forbidden to delete a directory with write permissions being
-# revoked with the 'chmod 555' command in MSYS, it's still allowed to create
-# subdirectories and files inside such a directory. This is why the following
-# 'fail pkg-configure libhello' test cases undesirably succeed in MSYS.
-#
-if [ "$msys" != "y" ]; then
-  # configure failed but disfigure succeeds
-  #
-  test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-  mkdir -p $cfg/libhello-1.0.0/build
-  chmod 555 $cfg/libhello-1.0.0/build
-  fail pkg-configure libhello $cxx_options
-  stat libhello "unpacked 1.0.0"
-  test pkg-purge libhello
-  stat libhello unknown
-
-  # configure and disfigure both failed
-  #
-  test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-  mkdir -p $cfg/libhello-1.0.0/build
-  # Trip both con/dis.
-  #
-  chmod 555 $cfg/libhello-1.0.0 $cfg/libhello-1.0.0/build
-  fail pkg-configure libhello $cxx_options
-  stat libhello/1.0.0 broken
-  chmod 755 $cfg/libhello-1.0.0 $cfg/libhello-1.0.0/build
-  rm -r $cfg/libhello-1.0.0
-  test pkg-purge -f libhello
-  stat libhello unknown
-fi
-
-# dependency management
-#
-test rep-create pkg/1/build2.org/depend/stable
-test cfg-create --wipe
-test rep-add $rep/depend/stable
-test rep-fetch --trust-yes
-
-test pkg-fetch libbar/1.0.0
-test pkg-unpack libbar
-fail pkg-configure libbar # no libfoo
-stat libbar/1.0.0 "unpacked; available"
-test pkg-fetch libfoo/1.0.0
-test pkg-unpack libfoo
-fail pkg-configure libbar # libfoo not configured
-test pkg-configure libfoo
-test pkg-configure libbar
-fail pkg-disfigure libfoo # libbar still depends on libfoo
-test pkg-disfigure libbar
-test pkg-disfigure libfoo
-test pkg-purge libbar
-test pkg-purge libfoo
-
-test pkg-fetch libfoo/1.0.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-fetch libbar/1.1.0
-test pkg-unpack libbar
-fail pkg-configure libbar # libfoo >= 1.1.0
-test pkg-disfigure libfoo
-test pkg-purge libfoo
-test pkg-fetch libfoo/1.1.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-configure libbar
-test pkg-disfigure libbar
-test pkg-disfigure libfoo
-test pkg-purge libfoo
-test pkg-purge libbar
-
-test pkg-fetch libfoo/1.1.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-fetch libbar/1.2.0
-test pkg-unpack libbar
-fail pkg-configure libbar # libfoo >= 1.2.0
-test pkg-disfigure libfoo
-test pkg-purge libfoo
-test pkg-fetch libfoo/1.2.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-configure libbar
-fail pkg-disfigure libfoo # "package libbar on libfoo >= 1.2.0"
-test pkg-disfigure libbar
-test pkg-disfigure libfoo
-test pkg-purge libfoo
-test pkg-purge libbar
-
-test pkg-fetch libfoo/1.1.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-fetch libbar/1.3.0
-test pkg-unpack libbar
-fail pkg-configure libbar # incompatible constraints
-test pkg-disfigure libfoo
-test pkg-purge libfoo
-test pkg-purge libbar
-
-
-##
-## pkg-status (also tested in pkg-{fetch,unpack,configure,disfigure,purge})
-##
-test rep-create pkg/1/build2.org/status/stable
-test rep-create pkg/1/build2.org/status/extra
-test rep-create pkg/1/build2.org/status/testing
-test rep-create pkg/1/build2.org/status/unstable
-
-# basics
-#
-test cfg-create --wipe
-stat libfoo/1.0.0 "unknown"
-stat libfoo "unknown"
-test rep-add $rep/status/stable
-test rep-fetch --trust-yes
-stat libfoo/1.0.0 "available"
-stat libfoo "available 1.0.0 sys:?"
-test pkg-fetch libfoo/1.0.0
-stat libfoo/1.0.0 "fetched; available"
-stat libfoo "fetched 1.0.0; available sys:?"
-
-# multiple versions/revisions
-#
-test cfg-create --wipe
-test rep-add $rep/status/extra
-test rep-fetch --trust-yes
-stat libbar "available 1.1.0+1 sys:?"
-test rep-add $rep/status/stable
-test rep-fetch --trust-yes
-stat libbar "available 1.1.0+1 1.0.0 sys:?"
-
-test cfg-create --wipe
-test rep-add $rep/status/testing
-test rep-fetch --trust-yes
-stat libbar "available 1.1.0 1.0.0+1 1.0.0 sys:?"
-
-test cfg-create --wipe
-test rep-add $rep/status/unstable
-test rep-fetch --trust-yes
-stat libbar "available 2.0.0 1.1.0 1.0.0+1 1.0.0 sys:?"
-test pkg-fetch libbar/1.0.0+1
-stat libbar "fetched 1.0.0+1; available 2.0.0 1.1.0 sys:?"
-test pkg-purge libbar
-test pkg-fetch libbar/2.0.0
-stat libbar "fetched 2.0.0; available sys:?"
-
-
-##
-## pkg-update
-##
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-
-fail pkg-update                # package name expected
-fail pkg-update libhello       # no such package
-test pkg-fetch libhello/1.0.0
-fail pkg-update libhello       # wrong package state
-test pkg-purge libhello
-
-# src == out
-#
-test pkg-fetch libhello/1.0.0
-test pkg-unpack libhello
-test pkg-configure libhello $cxx_options
-test pkg-update libhello
-test pkg-update libhello
-test pkg-disfigure libhello
-test pkg-purge libhello
-
-# src != out
-#
-test cfg-create --wipe
-test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-test pkg-configure libhello $cxx_options
-test pkg-update libhello
-test pkg-update libhello
-test pkg-disfigure libhello
-test pkg-purge libhello
-
-
-##
-## pkg-clean
-##
-test cfg-create --wipe
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-
-fail pkg-clean                  # package name expected
-fail pkg-clean libhello         # no such package
-test pkg-fetch libhello/1.0.0
-fail pkg-clean libhello         # wrong package state
-test pkg-purge libhello
-
-# src == out
-#
-test pkg-fetch libhello/1.0.0
-test pkg-unpack libhello
-test pkg-configure libhello $cxx_options
-test pkg-update libhello
-test pkg-clean libhello
-test pkg-clean libhello
-test pkg-disfigure libhello
-test pkg-purge libhello
-
-# src != out
-#
-test cfg-create --wipe
-test pkg-unpack -e pkg/1/build2.org/common/libhello-1.0.0
-test pkg-configure libhello $cxx_options
-test pkg-update libhello
-test pkg-clean libhello
-test pkg-clean libhello
-test pkg-disfigure libhello
-test pkg-purge libhello
-
-
-##
-## Low-level command scenarios.
-##
-
-
-# build and clean package
-#
-test cfg-create --wipe cxx $cxx_options
-test rep-add $rep/common/hello
-test rep-fetch --trust $hello_fp
-test pkg-fetch libhello/1.0.0
-test pkg-unpack libhello
-test pkg-configure libhello $cxx_options
-test pkg-update libhello
-test pkg-clean libhello
-test pkg-disfigure libhello
-test pkg-purge libhello
-
-##
-## pkg-build
-##
-
-# 1 (libfoo)
-#
-test rep-create pkg/1/build2.org/satisfy/t1
-test cfg-create --wipe
-
-fail pkg-build -p               # package name expected
-fail pkg-build -p libfoo        # unknown package
-fail pkg-build -p libfoo/1.0.0  # unknown package
-test pkg-build -p pkg/1/build2.org/satisfy/libfoo-1.1.0.tar.gz <<EOF
-build libfoo/1.1.0
-EOF
-test pkg-build -p pkg/1/build2.org/satisfy/libfoo-1.1.0/ <<EOF
-build libfoo/1.1.0
-EOF
-
-test pkg-unpack -e pkg/1/build2.org/satisfy/libfoo-1.1.0
-test pkg-build -p libfoo <<< "build libfoo/1.1.0"
-test pkg-build -p libfoo/1.1.0 <<< "build libfoo/1.1.0"
-test pkg-build -p libfoo libfoo <<< "build libfoo/1.1.0"
-fail pkg-build -p libfoo libfoo/1.1.0
-fail pkg-build -p libfoo/1.1.0 libfoo
-test pkg-build -p libfoo/1.1.0 libfoo/1.1.0 <<< "build libfoo/1.1.0"
-fail pkg-build -p libfoo/1.0.0
-test pkg-purge libfoo
-
-test rep-add $rep/satisfy/t1
-test rep-fetch --trust-yes
-test pkg-build -p libfoo <<< "build libfoo/1.0.0"
-test pkg-build -p libfoo/1.0.0 <<< "build libfoo/1.0.0"
-fail pkg-build -p libfoo/1.1.0
-
-test pkg-unpack -e pkg/1/build2.org/satisfy/libfoo-1.1.0
-test pkg-build -p libfoo <<< "build libfoo/1.1.0"
-test pkg-build -p libfoo/1.0.0 <<< "downgrade libfoo/1.0.0"
-fail pkg-build -p libfoo/0.0.1
-test pkg-purge libfoo
-
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-0.0.1.tar.gz
-test pkg-unpack libfoo
-test pkg-build -p libfoo <<< "upgrade libfoo/1.0.0"
-test pkg-build -p libfoo/0.0.1 <<< "build libfoo/0.0.1"
-fail pkg-build -p libfoo/1.1.0
-test pkg-purge libfoo
-
-# 2 (libbar depends on libfoo)
-#
-test rep-create pkg/1/build2.org/satisfy/t2
-test cfg-create --wipe
-
-fail pkg-build pkg/1/build2.org/satisfy/libbar-1.0.0.tar.gz
-
-test rep-add $rep/satisfy/t2
-test rep-fetch --trust-yes
-
-test pkg-build -p libbar <<EOF
-build libfoo/1.0.0 (required by libbar)
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo/1.0.0 <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0
-EOF
-fail pkg-build -p libbar libfoo libbar/1.0.0
-fail pkg-build -p libbar libfoo/1.1.0
-
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-0.0.1.tar.gz
-test pkg-unpack libfoo
-test pkg-build -p libbar <<EOF
-build libfoo/0.0.1 (required by libbar)
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo <<EOF
-upgrade libfoo/1.0.0
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo/0.0.1 <<EOF
-build libfoo/0.0.1
-build libbar/1.0.0
-EOF
-test pkg-purge libfoo
-
-test pkg-unpack -e pkg/1/build2.org/satisfy/libfoo-1.1.0
-test pkg-build -p libbar <<EOF
-build libfoo/1.1.0 (required by libbar)
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo <<EOF
-build libfoo/1.1.0
-build libbar/1.0.0
-EOF
-test pkg-build -p libbar libfoo/1.0.0 <<EOF
-downgrade libfoo/1.0.0
-build libbar/1.0.0
-EOF
-test pkg-purge libfoo
-
-# 3 (libbaz depends on libbar; libbar in prerequisite repository)
-#
-test rep-create pkg/1/build2.org/satisfy/t3
-test cfg-create --wipe
-test rep-add $rep/satisfy/t3
-test rep-fetch --trust-yes
-
-# only in prerequisite repository
-#
-fail pkg-build -p libfoo
-fail pkg-build -p libbar
-fail pkg-build -p libbaz libbar
-
-test pkg-build -p libbaz <<EOF
-build libfoo/1.0.0 (required by libbar)
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test rep-add $rep/satisfy/t2
-test rep-fetch
-
-# order
-#
-test pkg-build -p libfox libfoo <<EOF
-build libfox/1.0.0
-build libfoo/1.0.0
-EOF
-
-test pkg-build -p libfoo libfox <<EOF
-build libfoo/1.0.0
-build libfox/1.0.0
-EOF
-
-test pkg-build -p libbaz libfoo <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libfoo libbaz <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libbaz libfox <<EOF
-build libfoo/1.0.0 (required by libbar)
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-build libfox/1.0.0
-EOF
-
-test pkg-build -p libfox libbaz <<EOF
-build libfox/1.0.0
-build libfoo/1.0.0 (required by libbar)
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libfox libfoo libbaz <<EOF
-build libfox/1.0.0
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libfox libbaz libfoo <<EOF
-build libfox/1.0.0
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libfoo libfox libbaz <<EOF
-build libfoo/1.0.0
-build libfox/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libfoo libbaz libfox <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-build libfox/1.0.0
-EOF
-
-# this one is contradictory: baz before fox but fox before foo
-#
-test pkg-build -p libbaz libfox libfoo <<EOF
-build libfox/1.0.0
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libbaz libfoo libfox <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0 (required by libbaz)
-build libbaz/1.0.0
-build libfox/1.0.0
-EOF
-
-test pkg-build -p libbaz libfoo libbar <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0
-build libbaz/1.0.0
-EOF
-
-test pkg-build -p libbaz libbar libfoo <<EOF
-build libfoo/1.0.0
-build libbar/1.0.0
-build libbaz/1.0.0
-EOF
-
-# 4 (libbaz depends on libfoo and libbar; libbar depends on libfoo >= 1.1.0)
-#
-test rep-create pkg/1/build2.org/satisfy/t4a
-test rep-create pkg/1/build2.org/satisfy/t4b
-test rep-create pkg/1/build2.org/satisfy/t4c
-test rep-create pkg/1/build2.org/satisfy/t4d
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-
-test pkg-build -p libbaz <<EOF
-build libfoo/1.1.0 (required by libbar libbaz)
-build libbar/1.1.0 (required by libbaz)
-build libbaz/1.1.0
-EOF
-
-test pkg-build -p libfoo libbaz <<EOF
-build libfoo/1.1.0
-build libbar/1.1.0 (required by libbaz)
-build libbaz/1.1.0
-EOF
-
-fail pkg-build -p libfoo/1.0.0 libbaz
-fail pkg-build -p libfoo/1.1.0 libbaz
-
-# upgrade warning
-#
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-0.0.1.tar.gz
-test pkg-unpack libfoo
-test pkg-build -p libbaz <<EOF
-upgrade libfoo/1.1.0 (required by libbar libbaz)
-build libbar/1.1.0 (required by libbaz)
-build libbaz/1.1.0
-EOF
-test pkg-purge libfoo
-
-# downgrade error
-#
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-1.2.0.tar.gz
-test pkg-unpack libfoo
-fail pkg-build -p libbaz
-test rep-add $rep/satisfy/t4a
-test rep-fetch --trust-yes
-test pkg-build -p libfoo/1.1.0 libbaz <<EOF
-downgrade libfoo/1.1.0
-build libbar/1.1.0 (required by libbaz)
-build libbaz/1.1.0
-EOF
-test pkg-purge libfoo
-
-# dependent prevents upgrade/downgrade
-#
-test pkg-fetch libfoo/1.1.0
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-fetch libbar/1.1.0
-test pkg-unpack libbar
-test pkg-configure libbar
-fail pkg-build -p pkg/1/build2.org/satisfy/libfoo-1.2.0.tar.gz
-fail pkg-build -p libfoo/1.0.0
-test pkg-build -p libfoo/1.1.0 <<< "build libfoo/1.1.0"
-test pkg-disfigure libbar
-test pkg-disfigure libfoo
-test pkg-purge libbar
-test pkg-purge libfoo
-
-# dependent reconfigure
-#
-test cfg-create --wipe
-
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-test pkg-configure libfoo
-test pkg-fetch -e pkg/1/build2.org/satisfy/libbar-1.0.0.tar.gz
-test pkg-unpack libbar
-test pkg-configure libbar
-test pkg-fetch -e pkg/1/build2.org/satisfy/libbaz-1.1.0.tar.gz
-test pkg-unpack libbaz
-test pkg-configure libbaz
-
-test rep-add $rep/satisfy/t4a
-test rep-add $rep/satisfy/t4b
-test rep-fetch --trust-yes
-
-test pkg-build -p libbar <<EOF
-upgrade libfoo/1.1.0 (required by libbar libbaz)
-upgrade libbar/1.1.0
-reconfigure libbaz (dependent of libbar)
-EOF
-
-test pkg-build -p libfoo <<EOF
-upgrade libfoo/1.1.0
-reconfigure libbar (dependent of libfoo)
-reconfigure libbaz (dependent of libbar)
-EOF
-
-test pkg-build -p libfoo libbar/1.0.0 <<EOF
-upgrade libfoo/1.1.0
-reconfigure/build libbar/1.0.0
-reconfigure libbaz (dependent of libbar)
-EOF
-
-test pkg-build -p libbar/1.0.0 libfoo <<EOF
-upgrade libfoo/1.1.0
-reconfigure/build libbar/1.0.0
-reconfigure libbaz (dependent of libbar)
-EOF
-
-test pkg-build -p libbaz libfoo <<EOF
-upgrade libfoo/1.1.0
-reconfigure libbar (dependent of libbaz libfoo)
-reconfigure/build libbaz/1.1.0
-EOF
-
-test pkg-build -p libbaz libfoo/1.0.0 <<EOF
-build libfoo/1.0.0
-build libbaz/1.1.0
-EOF
-
-# actually build
-#
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libbaz
-stat libfoo/1.1.0 "configured; available"
-stat libbar/1.1.0 "configured"
-stat libbaz/1.1.0 "configured hold_package; available"
-
-# hold
-#
-test cfg-create --wipe
-test pkg-build -y pkg/1/build2.org/satisfy/libfoo-1.0.0.tar.gz
-stat libfoo "configured 1.0.0 hold_package hold_version"
-test pkg-build -y pkg/1/build2.org/satisfy/libfoo-1.1.0/
-stat libfoo "configured 1.1.0 hold_package hold_version"
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libfoo
-stat libfoo "configured 1.0.0 hold_package; available sys:?"
-test pkg-build -y libfoo/1.0.0
-stat libfoo "configured 1.0.0 hold_package hold_version; available sys:?"
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libfoo/1.0.0
-stat libfoo "configured 1.0.0 hold_package hold_version; available sys:?"
-
-test cfg-create --wipe
-test pkg-fetch -e pkg/1/build2.org/satisfy/libfoo-1.0.0.tar.gz
-test pkg-unpack libfoo
-test pkg-configure libfoo
-stat libfoo "configured 1.0.0"
-test pkg-build -y libfoo
-stat libfoo "configured 1.0.0 hold_package"
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libfoo
-stat libfoo "configured 1.0.0 hold_package; available sys:?"
-test pkg-build -y libbaz
-stat libfoo "configured 1.1.0 hold_package; available sys:?"
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libfoo/1.0.0
-stat libfoo "configured 1.0.0 hold_package hold_version; available sys:?"
-fail pkg-build -y libbaz
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libbaz
-stat libfoo "configured 1.1.0; available sys:?"
-
-# drop prerequisites on downgrade
-#
-test rep-create pkg/1/build2.org/satisfy/t5
-test cfg-create --wipe
-test rep-add $rep/satisfy/t2
-test rep-fetch --trust-yes
-
-test pkg-build -y libbar
-stat libfoo "configured 1.0.0; available sys:?"
-stat libbar "configured 1.0.0 hold_package; available sys:?"
-
-test rep-add $rep/satisfy/t5
-test rep-fetch --trust-yes
-
-test pkg-build -y libbar
-stat libfoo "available 1.0.0 sys:?"
-stat libbar "configured 1.2.0 hold_package; available sys:?"
-
-test pkg-build -y libbar/1.0.0 libfoo
-stat libfoo "configured 1.0.0 hold_package; available sys:?"
-stat libbar "configured 1.0.0 hold_package hold_version; available 1.2.0 sys:?"
-
-test pkg-build -y libbar
-stat libfoo "configured 1.0.0 hold_package; available sys:?"
-stat libbar "configured 1.2.0 hold_package; available sys:?"
-
-##
-## pkg-drop
-##
-test cfg-create --wipe
-
-fail pkg-drop -p               # package name expected
-fail pkg-drop -p libfoo        # unknown package
-fail pkg-drop -p libfoo/1.0.0  # unknown package
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4c
-test rep-fetch --trust-yes
-test pkg-build -y libbaz
-
-test pkg-drop -p -y libfoo libbaz libbar <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-# dependents
-#
-fail pkg-drop -y libfoo
-fail pkg-drop -y libfoo libbar
-fail pkg-drop -y libfoo libbaz
-
-test pkg-drop -p -y --drop-dependent libfoo <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test pkg-drop -p --drop-dependent libfoo libbaz <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test pkg-drop -p --drop-dependent libbaz libfoo <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-# prerequisites
-#
-test pkg-drop -p -y libbaz <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test pkg-drop -p -n libbaz <<EOF
-drop libbaz
-EOF
-
-test pkg-drop -p -n libbar libbaz <<EOF
-drop libbaz
-drop libbar
-EOF
-
-test pkg-drop -p -n libbaz libbar <<EOF
-drop libbaz
-drop libbar
-EOF
-
-# prerequisites and dependents
-#
-test pkg-drop -p -y --drop-dependent libbar <<EOF
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test cfg-create --wipe
-test rep-add $rep/satisfy/t4d
-test rep-fetch --trust-yes
-test pkg-build -y libbiz
-
-test pkg-drop -p -y libbiz <<EOF
-drop libbiz
-drop libbaz
-drop libbar
-drop libfoo
-drop libfox
-EOF
-
-test pkg-drop -p -y libfox libbiz <<EOF
-drop libbiz
-drop libfox
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test pkg-drop -p -y --drop-dependent libfox <<EOF
-drop libbiz
-drop libfox
-drop libbaz
-drop libbar
-drop libfoo
-EOF
-
-test pkg-drop -p -y --drop-dependent libbaz <<EOF
-drop libbiz
-drop libbaz
-drop libbar
-drop libfoo
-drop libfox
-EOF
-
-test pkg-drop -p -y --drop-dependent libbar <<EOF
-drop libbiz
-drop libbaz
-drop libbar
-drop libfoo
-drop libfox
-EOF
-
-test pkg-drop -p -y --drop-dependent libfoo <<EOF
-drop libbiz
-drop libbaz
-drop libbar
-drop libfoo
-drop libfox
-EOF
-
-test pkg-drop -p -n --drop-dependent libfox libbaz <<EOF
-drop libbiz
-drop libfox
-drop libbaz
-EOF
-
-test pkg-drop -p -n --drop-dependent libbaz libfox <<EOF
-drop libbiz
-drop libbaz
-drop libfox
-EOF
-
-test pkg-drop -p -n --drop-dependent libfox libbar <<EOF
-drop libbiz
-drop libfox
-drop libbaz
-drop libbar
-EOF
-
-test pkg-drop -p -n --drop-dependent libbar libfox <<EOF
-drop libbiz
-drop libbaz
-drop libbar
-drop libfox
-EOF
-
-# actually drop
-#
-test pkg-drop -y --drop-dependent libbar
-stat libfox/1.0.0 "available"
-stat libfoo/1.1.0 "unknown"
-stat libbar/1.1.0 "unknown"
-stat libbaz/1.1.0 "unknown"
-stat libbiz/1.0.0 "available"
-
-##
-## auth
-##
-
-# rep-create
-#
-fail rep-create pkg/1/build2.org/auth/create-noemail --key key.pem
-fail rep-create pkg/1/build2.org/auth/create-expired --key key.pem
-
-fail rep-create pkg/1/build2.org/auth/signed # no --key option
-test rep-create pkg/1/build2.org/auth/signed --key key.pem
-test rep-create pkg/1/build2.org/auth/unsigned1
-test rep-create pkg/1/build2.org/auth/unsigned2
-test rep-create pkg/1/build2.org/auth/name-mismatch --key key.pem
-
-test rep-create pkg/1/build2.org/auth/sha256sum-mismatch --key key.pem
-
-# Tamper signature manifest's sha256sum value.
-#
-s=d374c59b36fdbdbd0d4468665061d94fda9c6c687863dfe72b0bcc34ff9d5fb4
-edit pkg/1/build2.org/auth/sha256sum-mismatch/signature \
-     "s/^\(sha256sum: \).*\$/\1$s/"
-
-test rep-create pkg/1/build2.org/auth/signature-mismatch --key key.pem
-
-# Tamper signature manifest's signature value.
-#
-edit pkg/1/build2.org/auth/signature-mismatch/signature \
-     '/^signature: \\$/,/^\\$/d'
-cat >> pkg/1/build2.org/auth/signature-mismatch/signature << EOF
-signature: \\
-XBjnmXXVHY0RqMI0gL/P4t/vuWwK9JJkLl4Qf2gMxq5k2WQ2CIE56DfG0RaGklgKcI3UxsQZvMQI
-5PNtAHJDjteQ+BqY0io8A43KPX+2LKMU+I825sKmPRjCLYleGM3mNndDkWfYtAzYk5AmR2piqRz0
-D7CLq9GIoQQZO4Fw44muaQDMCRcXy8Txx2jDnretQjx/C0ZQw4M/cd6/cKEKUmLITDkBig9oVlSh
-tpxHqWz5NTbO3vm8ILc03AwiOJHwZweLb6ocJ6a467IJa+F/xUm9B09k8wFWMs+jHXXzHDE0syv7
-lqWL7SvHSjVFrGVFKS6nx7lCj2b8XFiGlwWIwjY4m/VK/5QmbL/lC4f+ww5XT5NG5iYh/eMaCxCJ
-zTg5iZsWNLhrx9uKNrL5xC4z0OONRVOwzu7gsqr0GLWewPyhH0AqJLgOSkw9N7FJwbv2IKNZ88YA
-u2YMXNkXytcQvENLVQDX5oxvUMEurUJFOCuYB/SEnpcwkV5h9RtXzIFVy4OCTU2MhQHDEldI8s7w
-Hga/ct4WupgE228gGdgwJLCbHx6AWBlS9iL10AdS8JkQ9LaZwTMHHz44f8y00X4MiT06gpgDeoQD
-rUyP0KNG65tdWnVTMqg6Q/YXhtRZLHoD6+QbiYLlruR1phu4y4fDt7AKxoXfeme/a86A37UogZY=
-\\
-EOF
-
-# rep-fetch
-#
-signed_fp=`rep_cert_fp pkg/1/build2.org/auth/signed`
-test cfg-create --wipe
-test rep-add $rep/auth/signed
-test rep-fetch --trust $signed_fp
-test rep-fetch
-
-test cfg-create --wipe
-test rep-add $rep/auth/signed
-test rep-fetch --trust-no --trust $signed_fp
-test rep-fetch
-test rep-fetch --trust-no # certificate is already trusted
-
-test cfg-create --wipe
-test rep-add $rep/auth/signed
-test rep-fetch --trust-yes
-test rep-fetch
-
-test cfg-create --wipe
-test rep-add $rep/auth/signed
-fail rep-fetch --trust-no
-
-test cfg-create --wipe
-test rep-add $rep/auth/signed
-fail rep-fetch --trust-yes --trust-no # inconsistent options
-
-test cfg-create --wipe
-test rep-add $rep/auth/unsigned1
-test rep-fetch --trust-yes
-test rep-fetch
-test rep-add $rep/auth/unsigned2
-test rep-fetch
-test rep-fetch --trust-no # certificates are already trusted
-
-test cfg-create --wipe
-test rep-add $rep/auth/unsigned1
-fail rep-fetch --trust-no
-
-test cfg-create --wipe
-test rep-add $rep/auth/name-mismatch
-fail rep-fetch --trust-yes # certificate name mismatch
-
-test cfg-create --wipe
-test rep-add $rep/auth/expired
-fail rep-fetch --trust-yes # certificate expired
-
-test cfg-create --wipe
-test rep-add $rep/auth/sha256sum-mismatch
-fail rep-fetch --trust-yes # packages file checksum mismatch
-
-test cfg-create --wipe
-test rep-add $rep/auth/signature-mismatch
-fail rep-fetch --trust-yes # packages file signature:mismatch
-
-# rep-info
-#
-test cfg-create --wipe
-test rep-info --trust-no --trust $signed_fp -d $cfg $rep/auth/signed <<EOF
-${repn}auth/signed `location auth/signed`
-CN=build2.org/O=Code Synthesis/info@build2.org
-$signed_fp
-
-libfoo/1.0.0
-EOF
-
-test rep-info --trust-no -d $cfg $rep/auth/signed <<EOF
-${repn}auth/signed `location auth/signed`
-CN=build2.org/O=Code Synthesis/info@build2.org
-$signed_fp
-
-libfoo/1.0.0
-EOF
-
-test cfg-create --wipe
-test rep-info --trust-yes $rep/auth/signed <<EOF
-${repn}auth/signed `location auth/signed`
-CN=build2.org/O=Code Synthesis/info@build2.org
-$signed_fp
-
-libfoo/1.0.0
-EOF
-
-fail rep-info --trust-no $rep/auth/signed <<EOF
-${repn}auth/signed `location auth/signed`
-CN=build2.org/O=Code Synthesis/info@build2.org
-$signed_fp
-
-libfoo/1.0.0
-EOF
-
-test cfg-create --wipe
-test rep-info --trust-yes -d $cfg $rep/auth/unsigned1 <<EOF
-${repn}auth/unsigned1 `location auth/unsigned1`
-
-libfoo/1.0.0
-EOF
-
-test rep-info --trust-no -d $cfg $rep/auth/unsigned2 <<EOF
-${repn}auth/unsigned2 `location auth/unsigned2`
-
-libfoo/1.0.0
-EOF
-
-test cfg-create --wipe
-test rep-info --trust-yes $rep/auth/unsigned1 <<EOF
-${repn}auth/unsigned1 `location auth/unsigned1`
-
-libfoo/1.0.0
-EOF
-
-fail rep-info --trust-no $rep/auth/unsigned1 <<EOF
-${repn}auth/unsigned1 `location auth/unsigned1`
-
-libfoo/1.0.0
-EOF
-
-##
-## system
-##
-
-test rep-create pkg/1/build2.org/system/t1 # foo/2 (->libbar>=2), libbar/2
-test rep-create pkg/1/build2.org/system/t2 # foo/2 (->libbar>=2), libbar/0+1
-test rep-create pkg/1/build2.org/system/t3 # ->t2; foo/2 (->libbar>=2)
-
-function build ()
-{
-  test build -p $*
-  test build -y $*
-}
-
-# Fetch system/t1 repository: foo/2 (->libbar/2), libbar/2
-#
-test cfg-create --wipe
-test rep-add $rep/system/t1
-test rep-fetch --trust-yes
-
-# Fail to build different combinations of package duplicates on the command
-# line.
-#
-fail build sys:libbar ?sys:libbar
-fail build ?sys:libbar sys:libbar
-fail build ?sys:libbar libbar
-fail build libbar ?sys:libbar
-fail build sys:libbar libbar
-fail build libbar sys:libbar
-
-# Build sys:libbar/*.
-#
-build sys:libbar <<< 'configure sys:libbar/*'
-stat libbar \
-     'configured,system * hold_package hold_version; available 2 1 sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Build foo with preconfigured sys:libbar/*.
-#
-build foo <<< "build foo/2"
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar \
-     'configured,system * hold_package hold_version; available 2 1 sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Reconfigure sys:libbar/* to 2.
-#
-build sys:libbar/2 <<EOF
-reconfigure sys:libbar/2
-reconfigure foo (dependent of libbar)
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Reconfigure sys:libbar/2 to libbar/2.
-#
-build libbar/2 <<EOF
-build libbaz/2 (required by libbar)
-reconfigure/build libbar/2
-reconfigure foo (dependent of libbar)
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured 2 hold_package hold_version; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-# Drop all, build foo and sys:libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build foo sys:libbar/2 <<EOF
-configure sys:libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Drop all, build sys:libbar/2 and foo.
-#
-test pkg-drop -y foo libbar
-
-build sys:libbar/2 foo <<EOF
-configure sys:libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Drop all, build libbar/2, then foo and sys:libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build libbar/2 <<EOF
-build libbaz/2 (required by libbar)
-build libbar/2
-EOF
-stat libbar 'configured 2 hold_package hold_version; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-build foo sys:libbar/2 <<EOF
-reconfigure sys:libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Drop all, build libbar/2, then foo and sys:libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build libbar/2 <<EOF
-build libbaz/2 (required by libbar)
-build libbar/2
-EOF
-stat libbar 'configured 2 hold_package hold_version; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-build foo sys:libbar <<EOF
-reconfigure sys:libbar/*
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar \
-     'configured,system * hold_package hold_version; available 2 1 sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Drop all, build sys:libbar/2, then foo and libbar/2, then reconfigure to
-# sys:libbar/2 and afterwards to libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build sys:libbar/2 <<< "configure sys:libbar/2"
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-
-build foo libbar/2 <<EOF
-build libbaz/2 (required by libbar)
-reconfigure/build libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured 2 hold_package hold_version; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-build sys:libbar/2 <<EOF
-reconfigure sys:libbar/2
-reconfigure foo (dependent of libbar)
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-build libbar/2 <<EOF
-build libbaz/2 (required by libbar)
-reconfigure/build libbar/2
-reconfigure foo (dependent of libbar)
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured 2 hold_package hold_version; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-# Drop all, configure sys:libbar/1, then fail to build foo but succeed to
-# build foo libbar.
-#
-test pkg-drop -y foo libbar
-
-build sys:libbar/1 <<< "configure sys:libbar/1"
-stat libbar 'configured,system 1 hold_package hold_version; available 2 sys:?'
-stat libbaz 'available 2 sys:?'
-
-fail build foo
-
-build foo libbar <<EOF
-build libbaz/2 (required by libbar)
-upgrade libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured 2 hold_package; available sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-# Drop all, then build foo ?sys:libbar.
-#
-test pkg-drop -y foo libbar
-
-build foo ?sys:libbar<<EOF
-configure sys:libbar/* (required by foo)
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system *; available 2 1 sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Drop all, configure libbar/1, then fail to build foo and foo ?sys:libbar/2,
-# but succeed to build foo sys:libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build libbar/1 <<EOF
-build libbaz/2 (required by libbar)
-build libbar/1
-EOF
-stat libbar 'configured 1 hold_package hold_version; available 2 sys:?'
-stat libbaz 'configured 2; available sys:?'
-
-fail build foo
-
-build foo ?sys:libbar/2<<EOF
-reconfigure sys:libbar/2 (required by foo)
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-build foo sys:libbar/2 <<EOF
-reconfigure sys:libbar/2
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-stat libbaz 'available 2 sys:?'
-
-# Fetch system/t2 repository: foo/2 (->libbar>=2), libbar/0+1
-#
-test cfg-create --wipe
-test rep-add $rep/system/t2
-test rep-fetch --trust-yes
-
-# Fail to build foo having no system package configured.
-#
-fail build foo
-fail build foo libbar
-stat foo 'available 2 sys:?'
-stat libbar 'available sys:?'
-
-# Build foo configuring sys:libbar.
-#
-build foo sys:libbar <<EOF
-configure sys:libbar/*
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system * hold_package hold_version; available sys:?'
-
-# Drop all, configure sys:libbar/1, then fail to build foo, but succeed to
-# build foo sys:libbar/2.
-#
-test pkg-drop -y foo libbar
-
-build sys:libbar/1 <<< "configure sys:libbar/1"
-stat libbar 'configured,system 1 hold_package hold_version; available sys:?'
-
-fail build foo
-build foo sys:libbar/2 <<EOF
-reconfigure sys:libbar/2
-build foo/2
-EOF
-
-# Drop all, fail to build build foo sys:libbar/1, then configure sys:libbar/2
-# but still fail to build foo sys:libbar/1.
-#
-test pkg-drop -y foo libbar
-
-fail build foo sys:libbar/1
-
-build sys:libbar/2 <<< "configure sys:libbar/2"
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-
-fail build foo sys:libbar/1
-
-# Drop all, configure sys:libbar/1, then fail to build sys:libbar/1.1 foo.
-#
-test pkg-drop -y libbar
-
-build sys:libbar/1 <<< "configure sys:libbar/1"
-stat libbar 'configured,system 1 hold_package hold_version; available sys:?'
-
-fail build sys:libbar/1.1 foo
-
-# Drop all, build foo ?sys:libbar, then drop foo and make sure libbar is purged
-# as well.
-#
-test pkg-drop -y libbar
-
-build foo ?sys:libbar<<EOF
-configure sys:libbar/* (required by foo)
-build foo/2
-EOF
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system *; available sys:?'
-
-test pkg-drop -y foo
-stat foo 'available 2 sys:?'
-stat libbar 'available sys:?'
-
-# Build sys:libbar/1, then build foo ?sys:libbar, then drop foo and make sure
-# libbar stays.
-#
-build sys:libbar/1<<EOF
-configure sys:libbar/1
-EOF
-stat libbar 'configured,system 1 hold_package hold_version; available sys:?'
-
-fail build foo
-
-build foo ?sys:libbar/2 <<EOF
-reconfigure sys:libbar/2 (required by foo)
-build foo/2
-EOF
-
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-
-test pkg-drop -y foo
-stat foo 'available 2 sys:?'
-stat libbar 'configured,system 2 hold_package hold_version; available sys:?'
-
-# Fetch system/t2 repository: foo/2 (->libbar>=2), libbar/0+1
-#
-test cfg-create --wipe
-test rep-add $rep/system/t3 # ->t2; foo/2 (->libbar>=2)
-test rep-fetch --trust-yes
-
-# After test number of faulty builds, then build foo ?sys:libbar/2. Afterwards
-# fail attempts to reconfigure libbar.
-#
-fail build foo
-fail build sys:libbar/1
-fail build foo sys:libbar/1
-fail build foo ?sys:libbar/1
-stat foo 'available 2 sys:?'
-stat libbar 'unknown'
-
-build foo ?sys:libbar/2 <<EOF
-configure sys:libbar/2 (required by foo)
-build foo/2
-EOF
-
-# libbar while being selected is still unknown.
-#
-fail build sys:libbar
-fail build foo sys:libbar
-
-build foo ?sys:libbar/3 <<EOF
-build foo/2
-EOF
-
-build foo ?sys:libbar <<EOF
-build foo/2
-EOF
-
-stat foo 'configured 2 hold_package; available sys:?'
-stat libbar 'configured,system 2'
-- 
cgit v1.1