From 6ffc28ac4ab66e692a6baf0ddb9f32cd0796893c Mon Sep 17 00:00:00 2001 From: Boris Kolpackov Date: Fri, 15 Jul 2022 10:35:32 +0200 Subject: WIP --- doc/manual.cli | 172 +++++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 161 insertions(+), 11 deletions(-) (limited to 'doc') diff --git a/doc/manual.cli b/doc/manual.cli index 257cfba..5c7ef97 100644 --- a/doc/manual.cli +++ b/doc/manual.cli @@ -405,7 +405,8 @@ The inclusion of \c{build/bootstrap.build} and \c{build/root.build} (if present) as well as any \c{build/config/*.build} (or their alternative naming scheme variants) is automatic. However, if \c{root.build} sources any files other than \c{build/config/*.build}, then they must be specified explicitly in -the package manifest using the \c{build-file} value (@@ REF). +the package manifest using the \l{#manifest-package-build-file \c{build-file}} +value. Inside these buildfiles the skeleton load can be distinguished from normal load by examining the \c{build.mode} variable, which is set to \c{skeleton} @@ -577,20 +578,153 @@ accept ($config.libfoo.buffer >= ($config.libfoo.cache ? 4096 : 8192)) \ The interesting case to consider in the above example is when -\c{config.libfoo.cache} changes from \c{true} to \c{false}. Without the reset +\c{config.libfoo.cache} changes from \c{true} to \c{false}: without the reset to defaults semantics the \c{prefer} clause would have kept the buffer at 8KB (since it's larger than the 4KB minimum). -@@ Is stuff set in prefer sivible in accept? Yes, currently. But maybe best - not to rely? +\N|Currently \c{accept} is always evaluated after \c{prefer} and temporary +variables (like \c{min_buffer} in the above example) set in \c{prefer} are +visible in \c{accept}. But it's best not to rely on this in case this changes +in the future. For example, we may try harder to resolve the \"yo-yo'ing\" +case mentioned above by checking if one of the alternating configurations +are acceptable to everyone without re-evaluation. + +This is also the reason why we need separate \c{accept} in the first place. +Plus, it allows for more advanced configuration techniques where we may need +to have an acceptance criteria but no preferences.| + +Configuration variables that are set by the dependent in the \c{prefer} clause +are visible in the subsequent clauses as well as in the subsequent \c{depends} +values of this dependent. Configuration variables that are not set, however, +are only visible until the immediately following \c{reflect} clause. For +example, in the above listing, \c{config.libfoo.cache} would be visible in the +\c{reflect} if it were to follow \c{accept} but no further. As a result, if we +need to make decisions based on configuration variables that we have no +preference about, they need to be saved in the \c{prefer} clause. For +example: + +\ +depends: +\\ +libfoo ^1.0.0 +{ + # We have no preference about the cache but need to + # observe its value. + # + prefer + { + } + + accept (true) + + reflect + { + config.hello.libfoo_cache = $config.libfoo.cache + } +} +\\ + +depends: libbar ^1.0.0 ? ($config.hello.libfoo_cache) +\ + +It is also possible to determine the origin of the configuration variable +value using the \c{$config.origin()} function. It returns either \c{undefined} +if the variable is undefined (only possible if it has no default value), +\c{default} if the variable has the default value from the \c{config} +directive in \c{root.build}, \c{buildfile} if the value is from a +\c{buildfile}, normally \c{config.build}, or \c{override} if the value is a +command line override (that is, user configuration). For example, this +is how we could use it if we only wanted to change the default buffer +value (notice that it's the variable's name and not its \c{$}-expansion +that we pass to \c{$config.origin()}): + +\ +prefer +{ + config.libfoo.buffer = ( \ + $config.origin(config.libfoo.buffer) == 'default' \ + ? 4096 \ + : $config.libfoo.buffer) +} +\ + +The following sub-sections discuss a number of more advanced configuration +techniques that are based on the functionality described in this section. + + +\h#dep-config-prefer-x-accept-xy|Prefer X but Accept X or Y| + +Consider a configuration variable that is a choice between several mutually +exclusive values, for example, user interface backends that could be, say, +\c{cli}, \c{gui}, or \c{none}. In such situations it's common to prefer one +value but being able to work with some subset of them. For example, we could +prefer \c{gui} but were also able to make do with \c{cli} but not with +\c{none}. Here is how we could express such a configuration: + +\ +libfoo ^1.0.0 +{ + # We prefer `gui`, can also work with `cli` but not `none`. + # + prefer + { + config.libfoo.ui = ( \ + $config.origin(config.libfoo.ui) == 'default' || \ + ($config.liba.ui != 'gui' && $config.liba.ui != 'cli') \ + ? 'gui' \ + : $config.liba.ui) + } + + accept ($config.liba.ui == 'gui' || $config.liba.ui == 'cli') +} +\ + +\h#dep-config-use-if-enabled|Use If Enabled| + +Sometimes we may want to use a feature if it is enabled by someone else but +not enable it ourselves. For example, the feature might be expensive and our +use of it tangential, but if it's enabled anyway, then we might as well take +advantage of it. Here is how we could express such a configuration: + +\ +libfoo ^1.0.0 +{ + # Use config.libfoo.x only if enabled by someone else. + # + prefer + { + } + + accept (true) + + reflect + { + config.hello.libfoo_x = $config.libfoo.x + } +} +\ + +\h#dep-config-disable-default|Disable If Enabled by Default| + +Sometimes we may want to disable a feature that is enabled by default provided +that nobody else needs it. For example, the feature might be expensive and we +would prefer to avoid paying the cost if we are the only ones using this +dependency. Here is how we could express such a configuration: + +\ +libfoo ^1.0.0 +{ + prefer + { + if ($config.origin(config.libfoo.x) == 'default') + config.libfoo.x = false + } + + accept (true) +} +\ -@@ This dependency reflect clause \"sees\" variables that were - not set. -@@ Hm, what do we need accept for at all? Flexibility (acceptable but - no preference)? Change algo in the future (evaluate accept without - prefer)? For example, we could try to resolve yo-yo'ing by seeing - if one of them is acceptable to both? \h1#manifests|Manifests| @@ -1577,6 +1711,21 @@ Windows in the \c{buildfile} (or, better yet, factor this check to \c{manifest} and \c{buildfile}), the reflect mechanism is the only way to communicate the selected dependency alternative (discussed next). +\N|An attempt to set a reflected configuration variable that is overridden by +the user is an error. In a sense, configuration variables used to reflect +information are the package's implementation details if the package management +is involved. If, however, the package is configured without \c{bpkg}'s +involvement, then these variables could reasonably be provided as user +configuration. + +If you feel the need to allow a reflected configuration variable to also +potentially be supplied as user configuration, then it's probably a good sign +that you should turn things around: make the variable only user-configurable +and use the enable condition instead of reflect. Alternatively, you could try +to recognize and handle user overrides with the help of the +\c{$config.origin()} function discussed in \l{#dep-config-negotiation +Dependency Configuration Negotiation}.| + While multiple \c{depends} values are used to specify multiple packages with the \i{AND} semantics, inside \c{depends} we can specify specify multiple packages (or groups of packages) with the \i{OR} semantics, called dependency @@ -2069,7 +2218,8 @@ The contents of the mandatory \c{bootstrap.build} file, optional \c{root.build} file, and additional files included by \c{root.build}, or their alternative naming scheme variants (\c{bootstrap.build2}, etc). Packages with the alternative naming scheme should use the \c{*-build2} values instead of -\c{*-build}. +\c{*-build}. See \l{#package-skeleton Package Build System Skeleton} for +background. These files must reside in the package's \c{build/} subdirectory and have the \c{.build} extension (or their alternative names). They can be provided either -- cgit v1.1