Add support for bbot.sys-install step in worker

1 files changed, 259 insertions, 11 deletions

diff --git a/doc/manual.cli b/doc/manual.cli
index 5c76c32..2f6d660 100644
--- a/doc/manual.cli
+++ b/doc/manual.cli
@@ -1067,6 +1067,14 @@ bpkg -v update <package-name>
   # bpkg.install
   #
   bpkg -v install <package-name>
+
+  # If bbot.install.ldconfig step is enabled:
+  #
+  {
+    # bbot.install.ldconfig
+    #
+    sudo ldconfig
+  }
 }
 
 # If bpkg.bindist.{debian,fedora,archive} step is enabled:
@@ -1079,6 +1087,51 @@ bpkg -v update <package-name>
        <package-name>
 }
 
+# If bbot.sys-install step is enabled:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-install.apt-get.update
+    #
+    sudo apt-get update
+
+    # bbot.sys-install.apt-get.install
+    #
+    sudo apt-get install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-install.dnf.install
+    #
+    sudo dnf install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # For each package file:
+    #
+    {
+      # bbot.sys-install.tar.extract
+      #
+      [sudo] tar -xf <distribution-package-file> \\
+                 <env-config-args> <tgt-config-args> <pkg-config-args>
+    }
+
+    # If bbot.sys-install.ldconfig step is enabled:
+    #
+    {
+      # bbot.sys-install.ldconfig
+      #
+      sudo ldconfig
+    }
+  }
+}
+
 # If the main package is installed either from source or from the
 # binary distribution package:
 #
@@ -1152,6 +1205,32 @@ bpkg -v update <package-name>
   }
 }
 
+# If the main package is installed from the binary distribution package:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-uninstall.apt-get.remove
+    #
+    sudo apt-get remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-uninstall.dnf.remove
+    #
+    sudo dnf remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # Noop.
+  }
+}
+
 # If the main package is installed from source:
 #
 {
@@ -1342,6 +1421,14 @@ bpkg -v update -d <host-conf> <package-name>
   # bpkg.install
   #
   bpkg -v install -d <install-conf> <package-name>
+
+  # If bbot.install.ldconfig step is enabled:
+  #
+  {
+    # bbot.install.ldconfig
+    #
+    sudo ldconfig
+  }
 }
 
 # If configuration is self-hosted and
@@ -1355,6 +1442,51 @@ bpkg -v update -d <host-conf> <package-name>
        <package-name>
 }
 
+# If bbot.sys-install step is enabled:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-install.apt-get.update
+    #
+    sudo apt-get update
+
+    # bbot.sys-install.apt-get.install
+    #
+    sudo apt-get install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-install.dnf.install
+    #
+    sudo dnf install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # For each package file:
+    #
+    {
+      # bbot.sys-install.tar.extract
+      #
+      [sudo] tar -xf <distribution-package-file> \\
+                 <env-config-args> <tgt-config-args> <pkg-config-args>
+    }
+
+    # If bbot.sys-install.ldconfig step is enabled:
+    #
+    {
+      # bbot.sys-install.ldconfig
+      #
+      sudo ldconfig
+    }
+  }
+}
+
 # If the main package is installed either from source or from the
 # binary distribution package:
 #
@@ -1476,6 +1608,32 @@ bpkg -v update -d <host-conf> <package-name>
   }
 }
 
+# If the main package is installed from the binary distribution package:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-uninstall.apt-get.remove
+    #
+    sudo apt-get remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-uninstall.dnf.remove
+    #
+    sudo dnf remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # Noop.
+  }
+}
+
 # If the main package is installed from source:
 #
 {
@@ -1639,6 +1797,14 @@ bpkg -v update -d <module-conf> <package-name>
   # bpkg.install
   #
   bpkg -v install -d <install-conf> <package-name>
+
+  # If bbot.install.ldconfig step is enabled:
+  #
+  {
+    # bbot.install.ldconfig
+    #
+    sudo ldconfig
+  }
 }
 
 # If configuration is self-hosted and
@@ -1652,6 +1818,51 @@ bpkg -v update -d <module-conf> <package-name>
        <package-name>
 }
 
+# If bbot.sys-install step is enabled:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-install.apt-get.update
+    #
+    sudo apt-get update
+
+    # bbot.sys-install.apt-get.install
+    #
+    sudo apt-get install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-install.dnf.install
+    #
+    sudo dnf install <distribution-package-file>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # For each package file:
+    #
+    {
+      # bbot.sys-install.tar.extract
+      #
+      [sudo] tar -xf <distribution-package-file> \\
+                 <env-config-args> <tgt-config-args> <pkg-config-args>
+    }
+
+    # If bbot.sys-install.ldconfig step is enabled:
+    #
+    {
+      # bbot.sys-install.ldconfig
+      #
+      sudo ldconfig
+    }
+  }
+}
+
 # If the main package is installed either from source or from the
 # binary distribution package:
 #
@@ -1725,6 +1936,32 @@ bpkg -v update -d <module-conf> <package-name>
   }
 }
 
+# If the main package is installed from the binary distribution package:
+#
+{
+  # If <distribution> is 'debian':
+  #
+  {
+    # bbot.sys-uninstall.apt-get.remove
+    #
+    sudo apt-get remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'fedora':
+  #
+  {
+    # bbot.sys-uninstall.dnf.remove
+    #
+    sudo dnf remove <distribution-package-name>...
+  }
+  #
+  # Otherwise, if <distribution> is 'archive':
+  #
+  {
+    # Noop.
+  }
+}
+
 # If the main package is installed from source:
 #
 {
@@ -1798,7 +2035,7 @@ to the \c{buildtab} configuration file. Blank lines and lines that start with
 
 <tgt-config-arg> = [[+|-]<prefix>:](<variable>|<option>) | \\
                    (+|-)<prefix>:
-<prefix> = <tool>[.<phase>][.<operation>[.<command>]]
+<prefix> = <tool>[.<cfg-type>][.<phase>][.<operation>[.<command>]]
 \
 
 Where \c{<machine-pattern>} is filesystem wildcard pattern that is matched
@@ -1850,12 +2087,20 @@ bpkg.install
 
 # Disabled by default.
 #
+bbot.install.ldconfig
+
+# Disabled by default.
+#
 bpkg.bindist.{debian,fedora,archive}
 
 # Disabled if bpkg.bindist.* is disabled.
 #
 bbot.sys-install
 
+# Disabled by default.
+#
+bbot.sys-install.ldconfig
+
 b.test-installed.test
 bpkg.test-separate-installed.update
 bpkg.test-separate-installed.test
@@ -1952,12 +2197,14 @@ linux*-gcc_8 linux-gcc_8 x86_64-linux-gnu \"all gcc-8+:gcc-7+\"
 If the \c{<tgt-config-arg>} list contains the \c{config.install.root} variable
 that applies to the \c{bpkg.create} step, then in addition to building and
 possibly running tests, the \c{bbot} worker will also test installing and
-uninstalling each package. Furthermore, if the package contains subprojects
-that support the test operation and/or refers to other packages via the
-\c{tests}, \c{examples}, or \c{benchmarks} manifest values which are not
-excluded by the \c{bbot} controller, then the worker will additionally build
-such subprojects/packages against the installation and run their tests (test
-installed and test separate installed phases).
+uninstalling each package (unless replaced with the \c{bbot.sys-install}
+step). Furthermore, if the package contains subprojects that support the test
+operation and/or refers to other packages via the \c{tests}, \c{examples}, or
+\c{benchmarks} manifest values which are not excluded by the \c{bbot}
+controller, then the worker will additionally build such subprojects/packages
+against the installation (created either from source or from the binary
+distribution package) and run their tests (test installed and test separate
+installed phases).
 
 Two types of installations can be tested: \i{system} and \i{private}. A system
 installation uses a well-known location, such as \c{/usr} or \c{/usr/local},
@@ -1977,10 +2224,11 @@ linux*-gcc* linux-gcc-sysinstall x86_64-linux-gnu \"all default gcc\" config.ins
 linux*-gcc* linux-gcc-prvinstall x86_64-linux-gnu \"all default gcc\" config.install.root=/tmp/install config.cc.poptions=-I/tmp/install/include config.cc.loptions=-L/tmp/install/lib config.bin.rpath=/tmp/install/lib
 \
 
-Note also that while building and running tests against the installation the
-worker makes the \c{bin} subdirectory of \c{config.install.root} the first
-entry in the \c{PATH} environment variable, except for build system modules
-which supposedly don't install any executables.
+Note also that while building and running tests against the installation
+created either from source or from the archive distribution package the worker
+makes the \c{bin} subdirectory of \c{config.install.root} the first entry in
+the \c{PATH} environment variable, except for build system modules which
+supposedly don't install any executables.
 
 The \c{bbot} controller normally issues the build task by picking an unbuilt
 package configuration and one of the produced (via the machine names match)